Nghĩa của từ bending point bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-điểm uố
Đặt câu có từ "bending point"
1. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending
2. Tensile strength and flexibility have been assessed with the aid of a four point bending configuration.
3. Bending tool assembly for determining the bending angle
4. 3-Point Bending involves placing the material across a span supported on either ends of the material and bringing down a point source to the center
5. The shear force and bending moment is initially calculated to determine the point where the Curtailment has to be done
6. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus
7. Adequate correlation exists between bending MOE and bending strength with moisture content.
8. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood
9. Bending results from a couple, or a Bending moment M, that is applied
10. We're bending the curve.
Chúng ta đang bẻ cong nó.
11. This bending indicates the Cone …
12. Bending vibration frequency in aerofoils;
13. — Bending vibration frequency in aerofoils;
14. Bowed: bending downward or forward.
15. Air Bending Combat: Air Bending is known for being almost entirely defensive, however it is reputed to be the most dynamic of the four Bending Arts
16. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material
17. Bowing: bending downward or forward.
18. (4) Bending and tensile strength
19. What does Bending mean? Information and translations of Bending in the most comprehensive dictionary definitions resource on …
20. Amob is world’s leading manufacturer for Tube Bending Machines, Pipe Benders, Angle Rolls and Section Bending Machines
21. Lifting and Bending the right way
22. Bending angle α shall be 180°.
23. Bending strength was also favourably affected.
24. Be careful of bending that spoon.
25. Compression Bending is faster and has a lower per-unit tooling cost than many other tube Bending methods.