Nghĩa của từ bending strength bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-cường độ chịu uốn
-độ bền uốn
-sức bền uốn
-sức chịu uốn
@Lĩnh vực: cơ khí & công trình
-cường độ uốn
@Lĩnh vực: ô tô
-sức (độ) chịu uố

Đặt câu có từ "bending strength"

Dưới đây là những mẫu câu có chứa từ "bending strength", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ bending strength, hoặc tham khảo ngữ cảnh sử dụng từ bending strength trong bộ từ điển Từ điển Anh - Việt

1. Bending strength was also favourably affected.

2. Device for measuring the bending strength of flat consignments

3. Alternative characterisations include moduli of elasticity and rupture, and bending strength.

4. The windowsills possess remarkable bending STRENGTH and high coefficient of elasticity.

5. 3¿ or more and a bending strength of 300 kg/cm?

6. B = e2 óF where óF is the bending strength at break;

7. Possible qualitative changes were observed by determining bending strength and crushing strength.

8. These same corrugations, however, result in a decrease in longitudinal bending strength.

9. Adequate correlation exists between bending MOE and bending strength with moisture content.

10. Macro-, micro-, and total porosity and bending strength (ISO 5833) were determined.

11. Bending strength, internal bond and hardness of all polystyrene treated particleboards were improved.

12. Composite producted from wood of higher density are characterized by higher bending strength.

13. This is demonstrated in the introduction by means of a bending strength test.

14. 3. The bending strength and stiffness were determined according to ASTM D4761-05.

15. Aluminum strip for lithographic printing plate supports having a high reversed bending strength

16. All cement specimens that we tested fulfilled the ISO requirements for bending strength.

17. The columnar bodies have a greater bending strength than that of the guide rails.

18. The threshold for optimising bending strength and weight is simply at a different level.

19. The bending strength of glulam depends on both board strength and finger joint strength.

20. SiC products thus have the highest cold-crushing strength, hot-bending strength and thermal conductivity.

21. A composite member (10) features a unique ply geometry which contributes to improved bending strength.

22. The poplar boards showed the highest bending strength, followed by those made from spruce and birch.

23. The board has markedly improved bending strength and resistance to pulling out of screws and nails.

24. The percentage absorption of oil is also depending on the bending strength of the original sheet.

25. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined.

26. A structural member of automobile exhibiting excellent bending strength and energy absorption characteristics while reducing the weight.

27. Furthermore, factors such as stiffness or shear and torsional strength may be more important than bending strength.

28. Smaller chips, such as the size of 0402, reached in all types of ceramics larger bending strength values.

29. Only bending strength has been higher as compared to spruce and fir; however, the individual values scatter considerably.