Nghĩa của từ bending test bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-sự thử uốn
@Lĩnh vực: xây dựng
-sự thử (nghiệm) uốn
-thí nghiệm uốn
@Lĩnh vực: điện
-thử uốn
@Lĩnh vực: hóa học & vật liệu
-thử uốn cong

Đặt câu có từ "bending test"

Dưới đây là những mẫu câu có chứa từ "bending test", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ bending test, hoặc tham khảo ngữ cảnh sử dụng từ bending test trong bộ từ điển Từ điển Anh - Việt

1. To this end the instrumented notched bar impact bending test is performed on unirradiated samples of the pressure vessel steel.

2. An empty hose, at a length of approximately # m must be able to withstand # times the hereafter prescribed alternating-bending-test without breaking

3. An empty hose, at a length of approximately #,# m must be able to withstand # times the hereafter prescribed alternating-bending-test without breaking

4. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking.

5. An empty hose, at a length of approximately 3.5 m must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking.

6. An empty hose, at a length of approximately 3,5 m must be able to withstand 3 000 times the hereafter prescribed alternating-bending-test without breaking.

7. An empty hose, at a length of approximately 3,5 m shall be able to withstand 3 000 times the hereafter prescribed alternating-bending-test without breaking.

8. 2.5.3.1. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking.

9. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorised in 2.2.7.4.6.

10. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorized in 2.2.7.4.6.