Nghĩa của từ bending moment coefficients bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-hệ số mômen uố

Đặt câu có từ "bending moment coefficients"

Dưới đây là những mẫu câu có chứa từ "bending moment coefficients", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ bending moment coefficients, hoặc tham khảo ngữ cảnh sử dụng từ bending moment coefficients trong bộ từ điển Từ điển Anh - Việt

1. Bending results from a couple, or a Bending moment M, that is applied

2. Check of interference fit strained by additional radial force with bending moment.

3. Plastic hinge characteristic curves are a bending moment (M) — rotational angle (φ) relationship.

4. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.

5. This force is necessary to create a bending moment that would be able to equilibrate the thermally induced moment due to the dissimilar adherends.

6. Performance limits for the tibia bending moment, the criteria ACL and MCL were presented to participants.

7. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

8. Moreover, the influence of initial crookedness would be reduced as slenderness ratio and bending moment are increased.

9. The spanwise aerodynamic loading of wings having minimum induced drag is derived for prescribed lift and root-bending moment.

10. A Biaxial column is a column that is subjected to compressive axial force and bending moment in the two planes

11. The shear force and bending moment is initially calculated to determine the point where the Curtailment has to be done

12. Purpose: Critical bending moment (CBM), defined as the bending moment at which the external nonaxial load applied overcomes screw joint preload and causes loss of contact between the mating surfaces of the implant screw joint components, was measured for four different implants and their single-tooth replacement abutments.

13. Bending tool assembly for determining the bending angle

14. The alongshore horizontal exchange coefficients were higher than cross-shore exchange coefficients.

15. Air resistance coefficients

16. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

17. A decoder device receives transform coefficients, where the transform coefficients are associated with multimedia data.

18. Spell power Coefficients usually

19. The bending moment at this section = Pcr.y The differential equation governing the small Buckling deformation is given by P y dx d y EI cr

20. Adequate correlation exists between bending MOE and bending strength with moisture content.

21. Activity coefficients are calculated iteratively.

22. Categories, qualities and coefficients:

23. The curves bending moment vs curvature change are given and discussed for various parameters (ratio of axes A/B, normal pressure q, curvature parameter μ).

24. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood

25. Binomial coefficients are a family of positive integers that occur as coefficients in the Binomial theorem