Nghĩa của từ repeated bending stress strength bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-giới hạn mỏi khi uốn nhiều lầ
Đặt câu có từ "repeated bending stress strength"
1. (4) Bending and tensile strength
2. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;
3. Bending strength was also favourably affected.
4. Adequate correlation exists between bending MOE and bending strength with moisture content.
5. The bending strength of glulam depends on both board strength and finger joint strength.
6. Possible qualitative changes were observed by determining bending strength and crushing strength.
7. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material
8. Device for measuring the bending strength of flat consignments
9. Key words: box girder, ship's hull, bending, ultimate strength, residual strength, residual stresses, initial imperfections.
10. SiC products thus have the highest cold-crushing strength, hot-bending strength and thermal conductivity.
11. Bending line This brochure deals with Bending of high strength steel for the trademarks Strenx, Hardox and Docol
12. Alternative characterisations include moduli of elasticity and rupture, and bending strength.
13. The windowsills possess remarkable bending STRENGTH and high coefficient of elasticity.
14. 3¿ or more and a bending strength of 300 kg/cm?
15. Aluminum alloy extrudate with excellent bending crushing strength and corrosion resistance
16. B = e2 óF where óF is the bending strength at break;
17. Furthermore, factors such as stiffness or shear and torsional strength may be more important than bending strength.
18. Bending high strength steel sheet and plate rarely proves to be difficult,
19. The splice is optimised for uniform bending stiffness and maximum strength retention.
20. During Abrasion, a series of repeated applications of stress takes place
21. These same corrugations, however, result in a decrease in longitudinal bending strength.
22. Macro-, micro-, and total porosity and bending strength (ISO 5833) were determined.
23. Bending strength, internal bond and hardness of all polystyrene treated particleboards were improved.
24. Composite producted from wood of higher density are characterized by higher bending strength.
25. The magnesium alloy plate has satisfactory strength in combination with excellent bending workability.