Nghĩa của từ repeated bending fatigue test bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-sự thí nghiệm mỏi uố

Đặt câu có từ "repeated bending fatigue test"

Dưới đây là những mẫu câu có chứa từ "repeated bending fatigue test", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ repeated bending fatigue test, hoặc tham khảo ngữ cảnh sử dụng từ repeated bending fatigue test trong bộ từ điển Từ điển Anh - Việt

1. Accordingly, the nano-hole electrode shows a very low change in electrical resistance during a bending fatigue test.

2. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;

3. No fatigue cracks ≥1mm shall exist after the test.

4. Static test was completed for the landing gear, while the aircraft’s fatigue test is in progress.

5. Test shall be repeated for opposite direction of balancing action.

6. Force versus angle requirement in static lower legform impactor bending certification test

7. This is demonstrated in the introduction by means of a bending strength test.

8. After a hearing test the drilling maneuver was repeated 4 times collectively.

9. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

10. Air resistance reduction device for fatigue test for blade and method for installing same

11. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.

12. Screws that were specifically designed for cement application displayed greatest stability in the fatigue test.

13. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined.

14. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorised in 2.2.7.4.6.

15. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorized in 2.2.7.4.6.

16. 26 On the basis of optimal material parameter, a simulated fatigue test was conducted on a Y7 airplane stringer joint. The effects of irradiant parameter on fatigue life was studied.

17. Bending tool assembly for determining the bending angle

18. When the neurologist repeated the test on the right side, the patient saw that hand normally as well.

19. To this end the instrumented notched bar impact bending test is performed on unirradiated samples of the pressure vessel steel.

20. Further, it is an object to provide a fatigue test device that enables an acceleration amplitude constant sweep test in a wide frequency band including a high frequency region.

21. One month after completing this treatment, the C-urea breath test was repeated to assess eradication of the infection.

22. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

23. Causes of Fatigue

24. Adequate correlation exists between bending MOE and bending strength with moisture content.

25. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood