Nghĩa của từ combined bending and torsion strength bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-sức chịu uốn khi xoắ

Đặt câu có từ "combined bending and torsion strength"

Dưới đây là những mẫu câu có chứa từ "combined bending and torsion strength", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ combined bending and torsion strength, hoặc tham khảo ngữ cảnh sử dụng từ combined bending and torsion strength trong bộ từ điển Từ điển Anh - Việt

1. The partition (15) compensates for a reduction in the bending and torsion strength of the valve shaft (12).

2. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;

3. (4) Bending and tensile strength

4. Adequate correlation exists between bending MOE and bending strength with moisture content.

5. The bending strength of glulam depends on both board strength and finger joint strength.

6. Possible qualitative changes were observed by determining bending strength and crushing strength.

7. Bending strength was also favourably affected.

8. Optical apparatus for measuring and checking (supervision) of bending angles, pipe constructions, resilience, torsion or geometry

9. SiC products thus have the highest cold-crushing strength, hot-bending strength and thermal conductivity.

10. Alternative characterisations include moduli of elasticity and rupture, and bending strength.

11. Bending line This brochure deals with Bending of high strength steel for the trademarks Strenx, Hardox and Docol

12. The windowsills possess remarkable bending STRENGTH and high coefficient of elasticity.

13. 3¿ or more and a bending strength of 300 kg/cm?

14. Aluminum alloy extrudate with excellent bending crushing strength and corrosion resistance

15. The combined deformation due to torsion and tension of incompressible rigid viscoplastic circular shafts is analyzed.

16. Device for measuring the bending strength of flat consignments

17. Macro-, micro-, and total porosity and bending strength (ISO 5833) were determined.

18. Furthermore, factors such as stiffness or shear and torsional strength may be more important than bending strength.

19. Bending high strength steel sheet and plate rarely proves to be difficult,

20. The splice is optimised for uniform bending stiffness and maximum strength retention.

21. Key words: box girder, ship's hull, bending, ultimate strength, residual strength, residual stresses, initial imperfections.

22. Just like torsion, in pure Bending there is an axis within the material where the stress and strain are zero

23. Bending strength, internal bond and hardness of all polystyrene treated particleboards were improved.

24. 3. The bending strength and stiffness were determined according to ASTM D4761-05.

25. Experience taught the wisdom of combined strength.

Kinh nghiệm đã dạy cho biết sự khôn ngoan của phối hợp sức mạnh.