Nghĩa của từ combined bending and compression bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-sự uốn ngang dọc
-sự uốn uốn né

Đặt câu có từ "combined bending and compression"

Dưới đây là những mẫu câu có chứa từ "combined bending and compression", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ combined bending and compression, hoặc tham khảo ngữ cảnh sử dụng từ combined bending and compression trong bộ từ điển Từ điển Anh - Việt

1. Compression Bending is faster and has a lower per-unit tooling cost than many other tube Bending methods.

2. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;

3. • Develop methods and devices to better predict the ultimate strength of tension, bending, shear and compression.

4. A climate control system with a vapour compression circuit combined with an absorption circuit

5. Concrete hollow cylinders subjected to combined compression and torsion were used to simulate concrete airport pavements subjected to biaxial fatigue loading in the compression region.

6. Bending: deforming force, which imposes tension on the outer curve and compression on the inner curve of a cylindrical body

7. Key words: timber, strength, size effects, length effect, weakest link theory, design method, load configuration, bending, compression, tension.

8. Compression therapy of the thigh is more critical because during bending of the leg while sitting compression stockings or bandages can cause local pressure above and below the knee and can locally compress the bypass.

9. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

10. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

11. Adequate correlation exists between bending MOE and bending strength with moisture content.

12. Bending tool assembly for determining the bending angle

13. In this paper, problems of bending of thin plates under the combined action of lateral loading and in-plane forces are studied by means of perturbation method.

14. (4) Bending and tensile strength

15. Methods. From February 2003 to February 200 five patients with spinal metastasis and spinal canal compression were treated by combined vertebroplasty and decompressive laminectomy in our department.

16. From our mechanical testing a prebending angle of 24° and a pretensioning force of 1500 N would allow the largest axial compression and show the most resistance against deformation in bending open.

17. Variable compression ratio engines and methods for homogeneous charge, compression ignition operation.

18. Adiabatic Compression and Expansion

19. Lifting and Bending the right way

20. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material

21. Air release valve for compression bag and compression bag with air release valve

22. Stimulation was achieved by bending of the hair, and defined by the direction, angle, and speed of bending.

23. The compression converges very quickly and the compression ratio approaches the theoretical limit.

24. What does Bending mean? Information and translations of Bending in the most comprehensive dictionary definitions resource on …

25. Amob is world’s leading manufacturer for Tube Bending Machines, Pipe Benders, Angle Rolls and Section Bending Machines