Nghĩa của từ combined bending bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-sự uốn phức tạp

Đặt câu có từ "combined bending"

Dưới đây là những mẫu câu có chứa từ "combined bending", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ combined bending, hoặc tham khảo ngữ cảnh sử dụng từ combined bending trong bộ từ điển Từ điển Anh - Việt

1. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

2. Bending tool assembly for determining the bending angle

3. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

4. Adequate correlation exists between bending MOE and bending strength with moisture content.

5. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood

6. In this paper, problems of bending of thin plates under the combined action of lateral loading and in-plane forces are studied by means of perturbation method.

7. Bending results from a couple, or a Bending moment M, that is applied

8. We're bending the curve.

Chúng ta đang bẻ cong nó.

9. This bending indicates the Cone …

10. Bending vibration frequency in aerofoils;

11. — Bending vibration frequency in aerofoils;

12. Bowed: bending downward or forward.

13. Air Bending Combat: Air Bending is known for being almost entirely defensive, however it is reputed to be the most dynamic of the four Bending Arts

14. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material

15. Bowing: bending downward or forward.

16. (4) Bending and tensile strength

17. What does Bending mean? Information and translations of Bending in the most comprehensive dictionary definitions resource on …

18. Amob is world’s leading manufacturer for Tube Bending Machines, Pipe Benders, Angle Rolls and Section Bending Machines

19. Lifting and Bending the right way

20. Bending angle α shall be 180°.

21. Bending strength was also favourably affected.

22. Be careful of bending that spoon.

23. Compression Bending is faster and has a lower per-unit tooling cost than many other tube Bending methods.

24. Stimulation was achieved by bending of the hair, and defined by the direction, angle, and speed of bending.

25. Bending line This brochure deals with Bending of high strength steel for the trademarks Strenx, Hardox and Docol