Nghĩa của từ bending breaking stress bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-ứng suất uốn gãy
Đặt câu có từ "bending breaking stress"
1. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;
2. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material
3. The compressive surface stress is tough in the glass because any bending load has to overcome quenched compressive stress before there's a net tensile stress on the surface.
4. The classical Westergaard type stress function analysis for in-plane stress crack problems is adapted to classical bending of cracked plates for determination of mode-1 stress intensity factors.
5. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending
6. Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.
7. Deflection Bending Stress, EJMA ”S6”, is stress resulting from deformation of the sidewalls of the convolutions caused by the movement of the bellows as it compresses, extends, or Angulates
8. Curvature and bending stress amplitude of double helix in langs of wire rope are much larger than in ordinary lay.
9. Just like torsion, in pure Bending there is an axis within the material where the stress and strain are zero
10. An empty hose, at a length of approximately # m must be able to withstand # times the hereafter prescribed alternating-bending-test without breaking
11. An empty hose, at a length of approximately #,# m must be able to withstand # times the hereafter prescribed alternating-bending-test without breaking
12. Bending tool assembly for determining the bending angle
13. An empty hose, at a length of approximately 3.5 m must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking.
14. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking.
15. After fixing, breaking, redesigning, mending, bending and amending, my ideal bow began to take shape, and when it was finally done, it looked like this.
Sau khi sửa chữa, bẻ và tái thiết kế, Tu sửa, uống cong và thay đổi, cái cung lý tưởng của tôi bắt đầu hình thành, và cuối cùng khi nó hoàn thành, nó sẽ như vầy.
16. Flakeboards were tested for internal bond strength, thickness swell, modulus of elasticity, modulus of rupture, and breaking strength in bending, after two severe accelerated aging tests.
17. An empty hose, at a length of approximately 3,5 m must be able to withstand 3 000 times the hereafter prescribed alternating-bending-test without breaking.
18. An empty hose, at a length of approximately 3,5 m shall be able to withstand 3 000 times the hereafter prescribed alternating-bending-test without breaking.
19. 2.5.3.1. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking.
20. 5 The effects of stress may quietly accumulate over a period of time until the breaking point is reached, without warning.
21. The wood samples treated with gases were also tested in bending stress. Wood absorbs ammonia very quickly, but the gas is only slightly bound.
22. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus
23. Super Cropping is a high-stress training technique that involves pinching and bending branches to damage the inner fibers while leaving the outer lining intact
24. Adequate correlation exists between bending MOE and bending strength with moisture content.
25. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood