Nghĩa của từ x axis bằng Tiếng Việt
@Chuyên ngành kinh tế
-trục X
@Chuyên ngành kinh tế
-trục hoành (độ)
Đặt câu có từ "x axis"
1. Flip on & X Axis
2. Jog X- axis from end- to- end, stopping in the middle, to check X- axis roll
Chạy bộ trục x từ end- to- end, dừng lại ở giữa, để kiểm tra X- axis cuộn
3. Let's see, that's my x- axis.
4. There's an x-axis bionumeric algorithm.
Có thuật tuán mã số trục x.
5. Next, remove the two X- axis shipping blocks holding the ram in place in the X- axis direction
Tiếp theo, loại bỏ hai trục x vận chuyển khối giữ ram tại chỗ theo hướng trục x
6. Asymptote The x-axis and y-axis are Asymptotes …
7. Now let's do the same for the x- axis.
8. That's my y-axis; this is my x-axis.
9. Apply Affine scaling on the x-axis to input data
10. They're both at the same level below the x- axis.
Chúng đều cùng mắc bên trên trục hoành.
11. Jog the turret to the middle of X- axis travel
Chạy bộ tháp pháo giữa X- axis du lịch
12. This is the horizontal axis over here is the x axis
Đây là trục hoành, trục x.
13. You can see this is the x- axis, the y- axis.
14. I made my x- axis a little shorter than I needed to.
15. Positive aileron deflection produces an anti - clockwise moment about the X axis.
16. Overall 'positioning accuracy' on the x-axis more (worse) than 30 μm.
17. I could draw it as a dotted line over our x- axis.
18. Distance a locates the focus of the parabola on the x axis.
19. Left triangle along the Y axis rotation, along the X axis Quadrilateral rotation.
20. Asymptote The x-axis and y-axis are Asymptotes of the hyperbola xy = 3
21. Or another way to put it is, this never does intersect the x- axis.
Hoặc một cách khác để đặt nó, điều này không bao giờ làm cắt trục x.
22. The Cartesian coordinate plane consists of two perpendicular lines, x-axis and y-axis
23. The next step is to make the font of the x axis a bit bigger.
24. And one radius is going to be the positive x- axis between 0 and 1.
Và một bán kính sẽ là tích cực trục x giữa 0 và 1.
25. We only specify the Y axis X axis will be little used for this community.
26. And it intersects the x axis when f of x is equal to 0, right?
27. Question: A Bar Of Length It Coincides With The Interval [0, 1] On The X-axis
28. Autocratization episode and the x-axis the EDI score at the fi nal year of Autocratization
29. X axis and Y axis adopt ball spiral rods with excellent precisions and low friction factors.
30. Jog X- axis to sweep the table over a distance of twenty inches ( 20 " or 500mm )
Chạy bộ trục x để quét bảng trên một khoảng cách của hai mươi inch ( 20 " hoặc 500 mm )
31. So if all the y values are negative, we have to say below the x- axis.
Như vậy toàn bộ đồ thị phải nằm phía dưới trục hoành vậy
32. And just to make it clear, this right here is the x- axis on my graph paper.
33. I don't know actually where this does intersect the x- axis or if it does it all.
34. So we are only going to be able to graph this function in the positive x- axis.
35. Steel printing platform, X - axis, Y axis precision fine - tuning the handle, easy version of the Register.
36. The x axis of this graph is the Churn of the file - lower, or left, is better
37. The two sp orbitals are linear with 180° angles and occupy the x-axis (cartesian coordinate system).
Hai orbital sp tuyến tính với góc 180° và chiếm lấy trục x (Hệ tọa độ Descartes).
38. It is the distance from the y -axis measured parallel to the x -axis Also : Absciss, Abscisse.
39. So really, the smallest of these are going to produce a point closest to the x- axis.
40. Where the line intersected the x- axis, y is 0, because we're not above or below it.
41. Jog X- axis to the middle of travel and Y- axis to full negative travel to provide clearance
Chạy bộ trục x đến giữa du lịch và trục y để đi du lịch đầy đủ tiêu cực để cung cấp giải phóng mặt bằng
42. Attach leveling tool T- 2192 to the spindle housing with the precision level parallel to the X- axis
Đính kèm leveling công cụ T- 2192 nhà ở trục với độ chính xác song song với trục x
43. So if those are my coordinate axes right there, that's my x- axis, that is my y- axis.
44. The parabola has the important property of reflecting to its focus all lines parallel to the x axis.
45. X-Axis definition is - the Axis in a plane Cartesian coordinate system parallel to which abscissas are measured.
46. An Audiogram is set up as a chart with the horizontal X-axis representing frequencies, or Hertz (Hz)
47. (33) 33 product ratings - AS-250 X AXIS POWER FEED KNEE MILLS FOR Bridgeport MILLING MACHINE 0-200 RPM
48. An example of an Abscissa is the measurement along the y-axis parallel with the x-axis to point p.
49. - a plane parallel to the Y axis, passing through V1 and at an upward angle of 3o from the X axis,
50. — a plane parallel to the Y axis, passing through V1 and at an upward angle of 7° from the X axis;