Nghĩa của từ x flow cylinder head bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: ô tô
-nắp máy (qui lát) có ống góp hút và thải đối xứng

Đặt câu có từ "x flow cylinder head"

1. Component for governing air flow in and around cylinder head port

2. It uses the EF7 cylinder head.

3. Plastic or aluminum cylinder head cover with:

4. Anfractuous x curly - gangstah flow (ft

5. the area where the cylinder head is joined to the cylinder is situated outside the heating air circuit.

6. Alternatively, the recirculation system is arranged substantially internally within the cylinder head.

7. This example models Axisymmetric flow between two concentric cylinders where the inner cylinder is rotating

8. Die Casting Machine Supplies: plunger head , cylinder, piston oil spray, and so on.

9. In the LBA addressing scheme, sectors are numbered as integer indexes; when mapped to CHS (cylinder-head-sector) tuples, LBA numbering starts with the first cylinder, first head, and track's first sector.

10. Elbow Air flow Control Valves Mount these valves directly to cylinder ports, eliminating additional tubing between the cylinder and valve for better control than inline valves

11.  · 2 x Alpenstocks; 4 x Rubber head; 2 x Mud frame; 2 x Snow frame; 2 x Connector; 1 x Carry bag; Key Features

12. Compression ratio was raised to 8.5:1 and a new alloy cylinder head fitted.

13. 1 Bedazzling beauty cylinder, 21S100, (4 1/2" h x 4 1/2" w)

14. 29 It was used to simulate the flow around an impulsively started cylinder at different Reynolds numbers.

15. Maintaining a constant flow through the strainer also avoids additional head loss associated with accelerating flow.

16. They flow around events rather than meeting them head-on.

17. An Angiogram of the head and neck is an X-ray test that uses a special dye and camera (fluoroscopy) to take pictures of the blood flow in the blood vessels of the head and neck

18. In such a rocker arms 33 and cams 30 and 31 interaction with admission 10 and emission 11 valves there are one intake and one discharge manifolds on the cylinder flow head opposite sides.

19. Engine mounting having a built-in exhaust-gas recirculation pipe, adapted cylinder head, and corresponding vehicle

20. In the utility model, the shape of a saddle in the flow head curve for the axial flow pump is eliminated, the progressive stall and the abrupt stall in the flow head curve for the axial flow compressor are also eliminated.

21. A vent orifice restricts the flow of air from the valve control chamber to the compression cylinder inlet.

22. This damper consists of cylinder, piston rod, piston head, orifice, silicon fluid and pressure adjustment valve.

23. Axisymmetric boundary layers are studied using integral analysis of the governing equations for axial flow over a circular cylinder

24. This item is a 1990 Vermeer AB12 auger Backfiller with the following: Kohler two cylinder gas engine, Hydrostatic transmission, 3'W, 18 x 9.50 x 8

25. Is defined by the following relationship: T 10 = Baffling factor x T theoretical = Baffling factor x Basin Volume / Flow Rate