Nghĩa của từ wall thickness tolerance bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-dung sai chiều thành ống

Đặt câu có từ "wall thickness tolerance"

Dưới đây là những mẫu câu có chứa từ "wall thickness tolerance", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ wall thickness tolerance, hoặc tham khảo ngữ cảnh sử dụng từ wall thickness tolerance trong bộ từ điển Từ điển Anh - Việt

1. Limiting the minimum Corroded wall thickness to that recommended in BS 5500 or ASME VIII, but making an additional allowance for mill tolerance

2. Coating and wall thickness gauges, adhesion testers, glossmeters and reflectometers.

3. Hornady Neck Wall Thickness Gauge …Thickness Gauge is a must-have accessory that complements the Hornady Concentricity Tool

4. Below a thickness limit, such walls wall may warp during peeling.

Bên dưới giới hạn độ dày, tường thành như vậy có thể cong trong khi bong tróc.

5. Our Borosilicate glass tubing has a wall thickness of 1mm to 1.2mm

6. The absolute cell wall thickness was clearly less related to wood density.

7. 1(5) Tubes and pipes of a wall-thickness not exceeding 4,5 mm.

8. As oppose to round plaingauge tubes which have a consistent wall thickness throughout its length, Butted tubes have variable wall

9. The amount of stress must be the maximum permissible stress in the following wall-thickness calculation

10. Normally the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis

11. Normally the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis.

12. Coring, locally eliminating material in these sections, is a way to pursue a uniform wall thickness

13. Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm, Filters, activated charcoal, Labware current sources, Power units, X-ray devices.

14. The rib thickness of at least one of the ribs having at least one angled side wall, as measured in the direction perpendicular to the side wall, can thereby be different from the thickness of the perpendicular ribs.

15. - the values actually measures for the outside diameter of the steel tube and for the wall thickness,

16. Reversible changes in cell wall water content, elasticity, and osmotic adjustment are all important drought tolerance mechanisms.

17. Coarseness, generally defined as weight per unit length of fiber, depends on physical fiber attributes including fiber diameter, cell wall thickness, and cell wall density

18. the values actually measures for the outside diameter of the steel tube and for the wall thickness

19. - the values actually measured for the outside diameter of the steel tube and for the wall thickness,

20. — the values actually measures for the outside diameter of the steel tube and for the wall thickness,

21. NormallyWhenever possible the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis.

22. the values actually measured for the outside diameter of the steel tube and for the wall thickness,

23. the values actually measured for the outside diameter of the steel tube and for the wall thickness

24. Samples cut from Culms at internodes 6 with dimensions 25 mm x 25 mm x Culms wall thickness

25. * He began to measure the wall, and its thickness was one reed and its height was one reed.