Nghĩa của từ surface curved in two planes bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-mặt hai độ cong
Đặt câu có từ "surface curved in two planes"
1. Two Martin spotter planes!
xuất hiện 2 chiếc máy bay do thám Martin
2. Thermal stresses around two parallel cracks in two bonded dissimilar elastic half-planes are determined.
3. With two routes and two planes, the fledgling airline carried 82K passengers in one year.
Với 2 tuyến đường bằng 2 máy bay, hãng hàng không non trẻ này đã chở được 82.000 lượt khách trong một năm.
4. Curved surface adjustment structure for led display screen, and led display screen
5. Abaqus/Explicit will create a Lagrangian Boundary region automatically for surface-type constraints (symmetry planes, moving Boundary planes, and fully clamped boundaries).
6. The four planes each made two sorties yesterday.
7. The emblem shows two crossed white curved swords in a yellow circle.
Quốc huy có hình hai lưỡi gươm trắng chéo nhau nằm trong vòng tròn màu vàng.
8. Standing on the tarmac were two American planes.
9. It accounts for the pitch angle and possible buckling in two planes.
10. The two newspapers are on completely different intellectual planes.
11. The determination of position and strength of the different shock sections (plane, slightly curved, circular) can be reduced approximately to two-dimensional problems. These problems arise in planes normal to the respective wave front in acoustic approximation.
12. Two eccentrics joined by a curved or straight link.
Hai chiếc van được nối vào nhau bởi một đường khớp nối thẳng hoặc cong.
13. Indianapolis shot down six planes and damaged two others.
Bản thân Indianapolis đã bắn rơi sáu máy bay và làm hư hại hai chiếc khác.
14. Grinder for flat surface and inside diameter of curved window glass of mobile device
15. In height, by two horizontal planes # m and # m respectively above the ground
16. Cinching is used to describe the relative motion of two layers around a curved surface like the motion used to tighten a belt before buckling it
17. Bolection definition is - a molding or group of moldings separating two planes (such as a stile from a panel) and projecting beyond the surface of both.
18. In 2000 two more Airbus planes arrived and an automated ticketing system was inaugurated.
19. Conformability is defined here as the ability to fit a doubly curved surface without folding
20. Angles are also formed by the intersection of two planes
21. Toothed wheel with a toroidal, curved pitch surface and toothed gearing with said toothed wheel
22. A solar module having a curved surface to facilitate shedding of accumulated snow and water.
23. Alternatively, said adapter having a box structure with walls only in two perpendicular planes.
24. Crooking This defect produces a plate that is curved along its plane (surface stays flat)
25. The measuring principle of large curved surface measurement system is intersection measurement of electronic theodolite.