Nghĩa của từ shear key bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-khóa chịu cắt
Đặt câu có từ "shear key"
1. Key words: Ground improvement, undrained shear strength, consolidation, stress path, settlement.
2. Key words: steel structures, trusses, tension members, welded connections, shear lag, Whitmore.
3. Key words: landslide, till, correlation, stratigraphy, back analysis, shear strength, residual, aerial photographs.
4. Key words : seismic, cone penetrometer, sources, receivers, accelerometers, shear wave, velocity, downhole, digital, signal processing.
5. Key words: foundation factor, site effect, soil–structure interaction, buildings, seismic, shear, design, code of practice.
6. Key words: beam-column connection, database, earthquake-resistant design, finite element analysis, reinforced concrete, shear strength, stirrups.
7. Key words: bored pile design, side resistance, matera clay, reliability-based design, undrained shear strength, adhesion factor.
8. Key words: ocean soil, sand, shear strength, pile, model test, bearing capacity, friction, uplift, active and passive earth pressures.
9. Shear algorithm
Thuật toán kéo cắt
10. Shear layer
11. Shear factor
12. Shear angle Y
13. Shear-jashub (3)
14. Shear angle X
15. Shear Amazement, Kitchener, Ontario
16. Shear tool plugin for digiKam
Bổ sung công cụ kéo cắt cho digiKamName
17. Using the shear resistance – shear displacement data from undrained monotonic ring shear tests and several processed horizontal earthquake accelerograms, the minimum peak earthquake acceleration necessary to cause a catastrophic shear failure under various seismic waveforms was estimated for conditions of no shear stress reversals on the sliding surface.
18. Hydrostatic shear inducing short dwell coater
19. 12 All shear stresses must vanish.
20. Plugs, anchors, anchor screws, bolts, shear connectors
21. 15 A fluid cannot withstand a shear.
22. CPT Correlations and shear wave velocity Correlations
23. Keywords: Cofferdams, stability, cell shear, sliding, bursting
24. Simultaneous shear and denaturation of nucleic acids
25. The camber of the plate after cutting in disc type shear is reduced by adding hydraulic movable pusher in front of the shear and adjusting the side guide roller behind the shear.