Nghĩa của từ shear friction factor bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-hệ số ma sát cắt

Đặt câu có từ "shear friction factor"

Dưới đây là những mẫu câu có chứa từ "shear friction factor", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ shear friction factor, hoặc tham khảo ngữ cảnh sử dụng từ shear friction factor trong bộ từ điển Từ điển Anh - Việt

1. Shear factor

2. The friction factor has a little effect on bucking critical load.

3. Key words: ocean soil, sand, shear strength, pile, model test, bearing capacity, friction, uplift, active and passive earth pressures.

4. Key words: foundation factor, site effect, soil–structure interaction, buildings, seismic, shear, design, code of practice.

5. Key words: bored pile design, side resistance, matera clay, reliability-based design, undrained shear strength, adhesion factor.

6. To Characterize the shear softening deformation of the grain contact: (5) τ = u s k si 1 + u s k si / τ S τ < c + σ n tanφ σ n tanφ when slipping where τ, u s, τ S, k si, c, and φ denote the shear stress, shear displacement, parameter controlling nonlinear shear deformation, initial shear stiffness, cohesion, and friction angle of the

7. Key words : probability, sheet-pile wall, active and passive pressure, friction angle, safety factor, safety margin, reliability index.

8. The use of Asbestos was extremely common in automotive parts in which durability and friction was a factor

9. The code reproduces shear band inclinations which depend on both the angle of friction and the angle of dilation. Localization occurs at the yield point.

10. Shear band width is sensitive to the size of the finite difference mesh but is controlled also by the magnitudes of the friction and dilation angles.

11. Shear algorithm

Thuật toán kéo cắt

12. Shear layer

13. Relevant parameters to be considered are: granulometry, plasticity, density and water content, degree of compaction, shear strength and angle of friction, permeability and void ratio, compressibility and consolidation.

14. Friction?

Cọ xát à?

15. Relevant parameters to be considered are: granulometry, plasticity, density and water content, degree of compaction, shear strength and angle of friction, permeability and void ratio, compressibility and consolidation

16. Shear angle Y

17. Friction.

Hãy cọ xát

18. Shear-jashub (3)

19. Shear angle X

20. Bedsores, often referred to as pressure ulcers and pressure sores are skin and tissue injuries that occur as a result of pressure in combination with friction and/or shear

21. Shear Amazement, Kitchener, Ontario

22. But friction-

Chỉ cọ xát thôi

23. 7 The friction is modeled with a modified coulomb friction model.

24. Shear tool plugin for digiKam

Bổ sung công cụ kéo cắt cho digiKamName

25. Using the shear resistance – shear displacement data from undrained monotonic ring shear tests and several processed horizontal earthquake accelerograms, the minimum peak earthquake acceleration necessary to cause a catastrophic shear failure under various seismic waveforms was estimated for conditions of no shear stress reversals on the sliding surface.