Nghĩa của từ load test pile bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-cọc thử tải trọng
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-cọc thử tải trọng
Đặt câu có từ "load test pile"
1. Key words: pile foundation, model test, layered soil, eccentric load, inclined load, sand, clay, analysis, bearing capacity.
2. Key words: bearing capacity, clay, displacements, eccentric load, horizontal load, lateral pressure, layered system, model test, pile, sand.
3. The Statnamic (STN) load test is characterized by a relatively long duration and low pile velocity and acceleration compared with the dynamic load test.
4. Key words : lateral load test, piles, reinforced concrete, concrete-filled pipe, seismic, liquefaction, pile curvature.
5. Key words : bearing capacity, deformation, batter pile, inclination factor, inclined load, layered soil, model test, sand, clay.
6. Key words: bearing capacity, clay, displacements, horizontal load, lateral pressure, layered soil, model test, moment, pile, pressuremeter, sand.
7. A load test to failure on a single pile indicated the pile–soil adhesion to be considerably lower than the undrained shear strength of the clay.
8. The load could have come from this pile of stones.
9. An arrangement for increasing the load carrying capacity of a pile
10. Stress Test Execution Scripts & Load Clients
11. Key words: bored concrete piles, construction problems, load tests, soft weathered rock under artesian pressures, ultimate pile load capacities.
12. The present invention also relates to a vertical load-carrying test method using this vertical load-carrying test apparatus.
13. The technical result consists in enhancing the horizontal load-bearing capacity of a pile.
14. Pile joint (connection device for load-bearing pre-cast concrete piles) (EOTA ref
15. A series of pile test responses are simulated for different pile lengths and different coefficients of lateral earth pressure.
16. 25 It's introduced some situation about H type steel pile driven into batholite, ultimate load carrying capacity and deviation of pile top while using long distance follower pile under water.
17. Therefore, it is feasible to analyze the bearing capacity of a large diameter single pile by three parameters load transfer function model of pile body and pile top and numerical iteration method.
18. Regulation No. 58 specifies neither a uniform load test nor an energy absorption test.
19. Primary load of the railway station was transmitted through conversion jacking joist to pile foundation.
20. The pile should now cover the looped ignition wire resting on test plate.
21. Method of manufacturing a reinforced oblong concrete product for longitudinal load-bearing purposes, and a driven pile
22. The test results showed an increase in pile capacity with increased rate of loading.
23. Primary load of the railway station was transmitted through conversion jacking joist to pile foundation. The max.
24. A load test is usually conducted to understand the behaviour of the system under a specific expected load.
25. Apply the test load at a rate not to exceed # mm/min until failure. Record the maximum load