Nghĩa của từ load-carrying capacity bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-khả năng chịu tải
@Chuyên ngành kỹ thuật
-khả năng chịu tải

Đặt câu có từ "load-carrying capacity"

Dưới đây là những mẫu câu có chứa từ "load-carrying capacity", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ load-carrying capacity, hoặc tham khảo ngữ cảnh sử dụng từ load-carrying capacity trong bộ từ điển Từ điển Anh - Việt

1. 2 Static load carrying capacity large.

2. An arrangement for increasing the load carrying capacity of a pile

3. The study revealed an increase in the load-carrying capacity of geogrid-reinforced piles.

4. Steel structure including a pre-stressing bracket for improving load-carrying capacity and serviceability

5. If we drill holes in strategic locations, we compromise the load-carrying capacity of the wall.

Chúng ta sẽ triệt tiêu khả năng chịu lực của cả một bức tường.

6. Due to their multiple layers, Bias ply tires generally have the advantage when it comes to load-carrying capacity

7. The two methods are demonstrated by the prediction of the load-carrying capacity of 21 piles at four sites.

8. The production machines allow to produce wheel rims of high load carrying capacity from rolled steel of 8.5 mm thickness.

9. Bolts are generally considered to be larger than screws and are used in a wide variety of applications especially where load-carrying capacity is a requirement

10. 26 Casting technique and curing condition of concrete have little effect on the load-deflection relationship, load carrying capacity, mode of failure and distribution of cracks in simple beams.

11. 25 It's introduced some situation about H type steel pile driven into batholite, ultimate load carrying capacity and deviation of pile top while using long distance follower pile under water.

12. The anchoring joints with glued-in steel rods with metric thread demonstrated a high load-carrying capacity with, however, large scatter and a brittle failure mode characterized by pull-out from the timber member.

13. Accordingly, an apparatus for reinforcing a beam structure is provided which can enhance a load carrying capacity of the beam structure at the same time as reinforcing the lower portion and side surfaces of the beam structure.

14. Where checks on the dynamic response of rail bridges are required to specify the load carrying capacity of the bridge, the load capacity of the bridge should be specified and expressed in terms of the design mass under normal payload according to section 2.1 of EN 15663:2009+AC:2010 taking the values for passenger payload in standing areas given in Table 45 into account.