Nghĩa của từ flexural bằng Tiếng Việt
@flexural
* tính từ
- cong queo; uốn khúc
@Chuyên ngành kỹ thuật
-cong
-uốn
-uốn cong
-uốn khúc
@Chuyên ngành kỹ thuật
-cong
-uốn
-uốn cong
-uốn khúc
Đặt câu có từ "flexural"
1. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material
2. The invention relates to a piezo flexural transducer unit which contains at least two flexural transducers (4, 5).
3. Reduction of flexural vibration amplitudes of turbine rotors
4. Admix 500 is used to increase tensile, bond, and flexural strength of approved products
5. Density, water absorption, thickness swelling, flexural strength and surface hardness were evaluated.
6. Piezo flexural transducer unit and piezo valve which is equipped with the same
7. Additive for controlling flexural bond strength, air entrainement and workability of mortar cement
8. Key words: thermal pressure, water tank, ice cap, mathematical model, design charts, hoop stress, flexural stress.
9. The bending modulus of elasticity and flexural strength are very important in this connection.
10. Key words: deflection, elastic, elastoplastic, flexural resistance, membrane force, membrane resistance, plates, steel, strains, stresses, transverse load.
11. During flexural toppling, the major principal stress is oriented predominantly parallel with the slope surface.
12. The flexural modulus of PLA is higher than polystyrene and PLA has good heat sealability.
Các mô đun uốn của PLA cao hơn polystyrene và PLA có khả năng chịu nhiệt tốt.
13. Differing from the fundamental flexural mode, the first overtone mode oscillation shows two Antinodes, oscillating in counterphase
14. To find a way to increase the flexural modulus without loss of abrasion resistance and impact resistance.
15. Acanthosis nigricans is a nonspecific skin change most commonly found in flexural areas such as the Axillae…
16. The notion of Biaxial bending is in fact a simplification of the flexural behavior for the purpose of theoretical convenience
17. In an acceleration sensor (11), the flexural spring (13) consists of a base plate, e.g. of Al¿2?
18. Struts of monosymmetric section built with angles and cut-Ts need to be checked on flexural-torsional buckling.
19. An analytical investigation of the large amplitude flexural vibration behaviour of clamped, rectilinearly orthotropic elliptical plates is carried out.
20. Said method allowing the selective control of features to achieve a profile that has increased transverse strength and flexural modulus.
21. Jan. 2010 The new Elaflon PTFE multipurpose hoses from ContiTech combine flexural fatigue strength and resistance to stress cracking with high temperature stability.
22. Vertical casting reduced not only flexural strength but also the capability of the fibres in resisting stress in the post-cracking stages.
23. Said metal frame (5) is formed to be thin and adapted and dimensioned in order to be able to or withstand flexural stresses.
24. In order to estimate the flexural behaviour of reinforced concrete members, the stress–strain behaviour of the constituent materials must be well established.
25. It was found that machine stiffness has no significant effect on the compressive strength, the flexural strength, or the critical stress intensity factor.
26. Leave out as much concrete as possible whilst maintaining the full flexural strength of the slab and allowing a bi-axial load transfer.
27. The effective elastic crack model originally developed by Karihaloo and Nallathambi (1989) was modified to evaluate the critical crack depth under pure flexural stresses.
28. The results obtained show that this new method of testing allows the acceleration of damage when the rate of flexural stress reaches about 60% of the rupture load.
29. Additives for ceramic tile adhesives, ceramic tile cements and cement mixes to enhance their flexibility, flexural strength, tensile strength, sheer adhesion strength, mechanical strength, and abrasion resistance
30. The first yield and inelastic buckling approaches often used to formulate methods of designing columns against flexural buckling are extended to the torsional buckling design of Cruciforms.
31. Admixtures for ceramic tile adhesives, ceramic tile cements and cement mixes to enhance their flexibility, flexural strength, tensile strength, sheer adhesion strength, mechanical strength, and abrasion resistance
32. The effects of surface finish on flexural strength of a feldspathic porcelain, Aluminous porcelain, and a computer aided design-computer aided machining porcelain (Vitabloc MKI) were examined
33. The clay mineral has a flexural strength of at least about 200 kilograms per square centimeter and a compressive strength of at least about 2,000 kilograms per square centimeter.
34. Said insulating board is composed of two layers having different resistances to flexural stress and/or from materials having different compressive strengths, the securing element being arranged therebetween.
35. Several mixes of laterite aggregate concrete were made with varying watercement and aggregate-cement ratios to study the properties like workability, compressive, flexural, tensile strength and Modulus of elasticity.
36. The use of the housing cap (7) allows the housing of the measuring sensor (1) to be produced at low costs and with an as high flexural strength as possible.
37. In the design method the beam flexural stiffness is calculated to give an adequate distribution of the interface stress so that the maximum stress in the wall does not exceed allowable limits.
38. In the design method the beam flexural stiffness is designed to give an adequate distribution of the interface stress so that the maximum stress in the wall does not exceed allowable limits.
39. Until now the formation of vortex structures in the southern Oetztal Alps (Eastern Alps) has been regarded as the result of external stresses, allowing adequately to explain the structures as flexural and passive folds.
40. PSI Crimped STEEL FIBER are low carbon, cold drawn steel wire fibers designed to provide concrete with temperature and shrinkage crack control, enhanced flexural reinforcement, improved shear strength and increase the crack resistance of concrete
41. Here, a novel Autonomously longitudinal scaffold constructed by the interspersion of in situ self‐polymerized methyl methacrylate (sMMA) in PbI 2 is introduced to fabricate efficient PVSCs with excellent flexural endurance and environmental adaptability
42. The effective flexural stiffness is determined from the slope of the elastic portion of an equivalent elastic-plastic load–deflection curve that has the same area under the curve as the actual nonlinear relationship.
43. The flexural strength of masonry walls constructed with autoclaved aerated-concrete blocks, sand-cement concrete blocks or calcium silicate bricks was evaluated in a test program that involved testing small-scale walls or wallettes.
44. The flexural modulus, abrasion resistance and all of the other secondary properties including: tensile strength, izod impact strength, coefficient of thermal expansion and coefficient of friction were tested August 31, 2005 Page 36 of 59
45. This set-up makes it possible to apply a purely tensile force, so that the secondary flexural stresses, if kept under control, constitute a degree of error comparable to the values allowed for normal testing apparatus.
46. The anatomical regions recognized as “special sites” are the head and neck, especially the ear, the milk line (axilla, mamae, mamillae, umbilicus, groin), acral regions (palms and soles, knee, dorsum of the foot) and flexural sites.
47. • The flexural modulus, abrasion resistance and all of the other secondary properties including: tensile strength, izod impact strength, coefficient of thermal expansion and coefficient of friction were tested on several blends of each of these additives at a variety of loading levels.
48. The first-generation monoblocks made of feldspathic ceramic material have largely been replaced by reinforced ceramic with silica (feldspar, leucite, and lithium disilicate), non-silica (alumina and zirconia), and Accombination of resin-ceramic–based materials resulting in a 3- to 11-fold increase in flexural strength
49. Abeam length containing two 50-cm long overlapping splices under constant bending moment is experimentally investigated with the following objectives: examine flexural and splitting crack openings along the splice length; determine the splice strength; study the effective stiffness of the beam length containing the splice, especially during the cracked stage.
50. Project Status Through these trials & experimentation we developed the knowledge that allowed us to develop a product that met both the primary property requirements of improved abrasion resistance and higher flexural modulus as well as the secondary property requirements of maintained tensile strength, izod impact strength, coefficient of thermal expansion and coefficient of friction.