Nghĩa của từ flexural strength bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-cường độ chịu uốn
-độ bền uốn
-giới hạn bền uốn
-sức bền uốn
@Lĩnh vực: xây dựng
-cường độ chống uốn
@Lĩnh vực: toán & tin
-giới hạn uốn
@Chuyên ngành kỹ thuật
-cường độ chịu uốn
-độ bền uốn
-giới hạn bền uốn
-sức bền uốn
@Lĩnh vực: xây dựng
-cường độ chống uốn
@Lĩnh vực: toán & tin
-giới hạn uố

Đặt câu có từ "flexural strength"

Dưới đây là những mẫu câu có chứa từ "flexural strength", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ flexural strength, hoặc tham khảo ngữ cảnh sử dụng từ flexural strength trong bộ từ điển Từ điển Anh - Việt

1. Density, water absorption, thickness swelling, flexural strength and surface hardness were evaluated.

2. Admix 500 is used to increase tensile, bond, and flexural strength of approved products

3. The bending modulus of elasticity and flexural strength are very important in this connection.

4. Vertical casting reduced not only flexural strength but also the capability of the fibres in resisting stress in the post-cracking stages.

5. It was found that machine stiffness has no significant effect on the compressive strength, the flexural strength, or the critical stress intensity factor.

6. Leave out as much concrete as possible whilst maintaining the full flexural strength of the slab and allowing a bi-axial load transfer.

7. Additives for ceramic tile adhesives, ceramic tile cements and cement mixes to enhance their flexibility, flexural strength, tensile strength, sheer adhesion strength, mechanical strength, and abrasion resistance

8. Admixtures for ceramic tile adhesives, ceramic tile cements and cement mixes to enhance their flexibility, flexural strength, tensile strength, sheer adhesion strength, mechanical strength, and abrasion resistance

9. The effects of surface finish on flexural strength of a feldspathic porcelain, Aluminous porcelain, and a computer aided design-computer aided machining porcelain (Vitabloc MKI) were examined

10. The clay mineral has a flexural strength of at least about 200 kilograms per square centimeter and a compressive strength of at least about 2,000 kilograms per square centimeter.

11. The use of the housing cap (7) allows the housing of the measuring sensor (1) to be produced at low costs and with an as high flexural strength as possible.

12. The flexural strength of masonry walls constructed with autoclaved aerated-concrete blocks, sand-cement concrete blocks or calcium silicate bricks was evaluated in a test program that involved testing small-scale walls or wallettes.

13. The first-generation monoblocks made of feldspathic ceramic material have largely been replaced by reinforced ceramic with silica (feldspar, leucite, and lithium disilicate), non-silica (alumina and zirconia), and Accombination of resin-ceramic–based materials resulting in a 3- to 11-fold increase in flexural strength