Nghĩa của từ finite element analysis bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-phương pháp phần tử hữu hạn
@Chuyên ngành kỹ thuật
-phương pháp phần tử hữu hạ
Đặt câu có từ "finite element analysis"
1. The use of parallel processing in finite element analysis.
2. Formulation of 2 - D isoparametric quadrilateral element is done for finite element analysis.
3. Isoparametric element of arbitrary quadrilateral plays an important role in finite element analysis.
4. Key words: structural steel, welded joints, fatigue, improvement methods, fillet welds, finite element analysis.
5. 3 In this case the subject for the finite element analysis is the bone.
6. This paper details a hybrid cellular/macroscopic finite element analysis of wood during the cutting process.
7. In addition, the stress on the osseous cup cavity was determined in the finite-element analysis.
8. 22 The element size affects greatly the simulation result during finite element analysis of structure, in ANSYS.
9. 17 In this paper , Finite element analysis ( FEA ) simulation models for partial discharge wave propagation are built.
10. 6 Strength of the school box with ABAQUS finite element analysis,(www.Sentencedict.com) and electric stress test method.
11. Finite element analysis of plane, simple and practical, you can compile and run on a FORTRAN compiler.
12. Cae software encompass finite element analysis (FEA), computational fluid dynamics (CFD), multibody dynamics (MDB), and optimization capabilities.
13. Key words: beam-column connection, database, earthquake-resistant design, finite element analysis, reinforced concrete, shear strength, stirrups.
14. The accuracy of the nonlinear finite element analysis is demonstrated using test results conducted by other researchers.
15. Aim To realize optimized construction and volume of rail wheel and axle in complex loads with finite element analysis.
16. The Round-Robin is carried out in collaboration with ACI-ASCE committee 447 (“Finite Element Analysis of Reinforced Concrete Structures”).
17. Bilinear interpolation is linear interpolation in 2 dimensions, and is typically used for image scaling and for 2D finite element analysis.
18. Their engineers are familiar with the use of finite element analysis tools to facilitate the design phase and reduce production costs.
19. Finite element analysis has been successfully employed to design lenses and beam deflection coils to minimise aberration and improve positional accuracy.
20. The 3-D dynamic temperature field in the butt-welding of TIG was simulated by the finite element analysis software(ANSYS).
21. 25 The study on dynamic characteristic of rolling washing machine cabinet is performed with Finite Element Analysis Method and modal experiment.
22. 16 This paper proposes a load-modifying method for the finite element analysis of the single-deck floating roof under rainwater loading.
23. Exhaustive tests are conducted including finite element analysis and modal analysis to make certain our Aerials meet or exceed all NFPA 1901 standards
24. • MRI compatibility Finite element analysis Accelerated fatigue testing Corrosion testing Stent hydrogen content Contact and radial pressure Stent recoil Surface characterization Coil retention
25. Objective: To study how the depth and morphology of affected the dentinal stress distribution of the root of maxillary central incisor using three-dimensional-finite-element analysis.
26. 23 The tube expanding process is simplified as the deforming process. of a ring under internal pressure. Aspecific finite element analysis procedure is programmed to simulate the deforming process.
27. Aim To realize optimized construction and volume of rail wheel and axle in complex loads with finite element analysis. Methods 3D model is build by means of Solidworks software.
28. 9 That we use finite element analysis calculate to the strength and the rigidity of the bodywork structure. Thus the optimum fillet of the small underframe structure can be specified.
29. When creating a model for finite element analysis, natural lines of symmetry and Antisymmetry can allow for analysis of a structure or system by modeling only a portion of it
30. 12 Methods:The models of 3 dimensional finite element analysis (3 D FEA) of left upper permanent central incisor were designed by microtomy. Comparative studies of stress distribution were carried out.
31. Based on the force behavior of joist of large-span prestressed space frame system, space finite element analysis of prestressed beam-slab system is carried out by using ANSYS software.
32. 20 Head shaft is one of the main load- carrying parts in chain conveyor. Finite element analysis and optimal design of the head shaft are conducted and its optimum dimensions are obtained.