Nghĩa của từ end wall tube bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-ống vách đáy lò
@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-ống vách đáy lò

Đặt câu có từ "end wall tube"

1. Snip off the end of the tube.

2. The shroud assembly includes a nose cone having a forward end and a rear end, a central tube having a forward end contiguous with the rear end of the nose cone, and a rear end, and an aft tube having a forward end contiguous with the rear end of the central tube.

3. Disconnect other end of breathing tube from PAPR assembly.

4. Entry of pollen tube through chalazal end is Basigamy

5. 21 Cut tube end square, ream, burr and size.

6. End-wall frame for led alphanumeric display

7. 19 Cut tube end square . Ream,(Sentencedict.com) burr and size.

8. A tube wall, division wall, or wing wall section (10) for a circulating fluidized bed boiler with improved erosion resistant characteristics has a reduced diameter tube section (40) adjacent the refractory covered by an abrasion resistant refractory tile (60).

9. Furthermore, the friction surface rests against the inner wall of the guide tube.

10. Unity Tube’s integral Belled end finned tube eliminates the need for expensive silver brazing of the tube to bell and greatly extends the life of the Belled end finned tube beyond that of any mechanically

11. For the wall of the entrance tube arranged upstream of the heat transfer tube either constant temperature or adiabatic conditions were assumed.

12. These were securely Belted on to the end of the brass tube.

13. " Aglet... a plastic or metal tube covering the end of a shoelace. "

" Aglet... môt ống nhựa hoặc kim loại dùng để cột dây giày "

14. Alternatively, the transfer tube wall temperatures required may be determined through standard heat transfer calculations.

15. The test tube is closed at one end with a hydraulic seal.

16. A tube shaped acoustic passage has an acoustically resistive section near the inlet end or the outlet end.

17. Choose from Brazed plate, shell and tube, double wall Brazed plate and plate and frame types

18. Coining is an end-forming process which uses special dies and a press to flatten, or coin, a tube end

19. The static mixer comprises: an external tube (2) which includes one end portion connected to an exhaust manifold of a diesel engine, the other end portion connected to an SCR (Selective Catalytic Reduction), and a part for which a urea solution injector adaptor (5) is provided; an internal tube (3) which is provided inside the external tube (2) to have a constant gap between at least a part of an outer wall surface thereof and an inner wall surface of the external tube (2); and a channel unit (10) which includes a plurality of guiding channels (11) provided in a longitudinal direction inside the internal tube (3) and has a bent inlet portion (12) facing a lower end portion of the urea solution injector adaptor (5).

20. A Cystoscope is a thin tube with a camera and light on the end

21. the values actually measured for the outside diameter of the steel tube and for the wall thickness,

22. the values actually measured for the outside diameter of the steel tube and for the wall thickness

23. - the values actually measures for the outside diameter of the steel tube and for the wall thickness,

24. the values actually measures for the outside diameter of the steel tube and for the wall thickness

25. - the values actually measured for the outside diameter of the steel tube and for the wall thickness,