Nghĩa của từ dowel (dowel pin) bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-chốt định vị
Đặt câu có từ "dowel dowel pin"
1. Not all parts will receive dedicated dowel pin holes.
2. Fit a dowel pin here to keep the adjacent parts aligned.
3. The guard rail bolt comprises the dowel (10) and a counter-dowel (20).
4. The carpenter gauged the dowel with calipers.
5. A-XINTONG Vertical Self Centering Dowel Jig Kit,Dowel Drill Guide,2.75" Aluminum Alloy 3-Hole Drill Bit Guide Jig Positioner Locator,6/8/10mm Pin Fixture Wood Hole Drill Bit Set Woodworking Tools
6. Objective To compare the long term effectiveness of three types of dowel pin as treatment post core crowning.
7. What would be the bottom surface of the block is then skimmed flat, and locating dowel pin holes are drilled.
8. Precision Clevis Pins These pins combine the locking capabilities of a Clevis pin with the precision diameter of a dowel pin for a tight fit.
9. A dowel pin with the adjustable diameter comprises a pin body (2), a shaft sleeve (4), at least two sleeve barrels (6) and an elastic ring (8).
10. I go to a place where a dowel splits off.
Tôi đến một nơi mà lề cửa bị tách ra.
11. Press fit buttons with other than centered round holes will use dowel locator for position or flat key. Dowel locators are preferred due to space requirements.
12. Active ring sensor with dowel pins fixed to the bearing
13. One four foot length of wooden dowel that fits inside the pipe.
14. Our main products include redirector dowel, armor plate spring dowel, armor plate spring stationary rings series. there about hundred products of three series which occupancy 100% at FAW market.
15. A center longitudinal axis (17) of the fixed dowel pin (11) is arranged at an acute angle (W1) with respect to the bottom surface (5).
16. It designs two spring dowel locating systems to rotate and locate the part.
17. The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.
18. Objective : To make the dowel nucleus fusion model with self - cured acrylic resin ingot.
19. Auto inserted technology of dowel bar is one of important technologies for long - life pavement.
20. Nails, screw nails, pins, screws, washers, hooks, rivets, dowel bars, anchors, studs, pegs, grips, wire
21. Ball Plunger Soft - tip socket set screw , socket screw , disc spring, dowel pins , springs pins , washers.
22. The length of the dowel or dowels should conform to the length of the blowpipe itself.
23. Each dowel is cut without a middle guide hole, leaving the cartilage and Cancellous matrix uninterrupted
24. Under load conditions , the stress - producing characteristics of the dowel increased with shorter lengths and smaller diameters.
25. Hanger Bolts and dowel screws are used for adding an external machine or screw thread to wood applications