Nghĩa của từ dowel-type gripper bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-kẹp chốt
Đặt câu có từ "dowel-type gripper"
1. A gripper weaving machine provided with a bringer gripper and a deflecting guide
2. The guard rail bolt comprises the dowel (10) and a counter-dowel (20).
3. Egg chain gripper actuating device and egg transfer device.
4. The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.
5. The carpenter gauged the dowel with calipers.
6. Not all parts will receive dedicated dowel pin holes.
7. I go to a place where a dowel splits off.
Tôi đến một nơi mà lề cửa bị tách ra.
8. An accessor with a gripper transports cartridges between storage cells and storage drives.
9. Press fit buttons with other than centered round holes will use dowel locator for position or flat key. Dowel locators are preferred due to space requirements.
10. Fit a dowel pin here to keep the adjacent parts aligned.
11. Active ring sensor with dowel pins fixed to the bearing
12. One four foot length of wooden dowel that fits inside the pipe.
13. The gripping functionality of the micro-gripper was ensured with the integration of voltage-driven piezo-electric actuators.
14. Our main products include redirector dowel, armor plate spring dowel, armor plate spring stationary rings series. there about hundred products of three series which occupancy 100% at FAW market.
15. It designs two spring dowel locating systems to rotate and locate the part.
16. Objective : To make the dowel nucleus fusion model with self - cured acrylic resin ingot.
17. A-XINTONG Vertical Self Centering Dowel Jig Kit,Dowel Drill Guide,2.75" Aluminum Alloy 3-Hole Drill Bit Guide Jig Positioner Locator,6/8/10mm Pin Fixture Wood Hole Drill Bit Set Woodworking Tools
18. Auto inserted technology of dowel bar is one of important technologies for long - life pavement.
19. The sealing member may include an angled upwardly extending abutment portion (14) for assisting location of the carpet gripper.
20. The vacuum chamber is charged by an automatic gripper robot and switched by a corresponding valve control device.
21. Nails, screw nails, pins, screws, washers, hooks, rivets, dowel bars, anchors, studs, pegs, grips, wire
22. Ball Plunger Soft - tip socket set screw , socket screw , disc spring, dowel pins , springs pins , washers.
23. 20 Hanging from hooks on the wall were sets of wire-pulling devices, complete with chain winch and gripper.
24. The length of the dowel or dowels should conform to the length of the blowpipe itself.
25. Each dowel is cut without a middle guide hole, leaving the cartilage and Cancellous matrix uninterrupted