Nghĩa của từ combustion products bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-sản phẩm cháy
Đặt câu có từ "combustion products"
1. Appliances connected to a flue for the dispersal of combustion products must be so constructed that in abnormal draught conditions there is no release of combustion products in a dangerous quantity into the room concerned.
2. Appliances connected to a flue for the dispersal of combustion products must be so constructed that in abnormal draught conditions there is no release of combustion products in a dangerous quantity into the room concerned
3. The combustion products (water, carbon dioxide and nitrogen) are separated by adsorption on specific adsorbing agents.
4. Work results from the hot gaseous Combustion products acting on the engine’s moving surfaces, such as …
5. Finally, point 3.4.3 states that appliances connected to a flue for the dispersal of combustion products must be so constructed that in abnormal draught conditions there is no release of combustion products in a dangerous quantity into the room concerned.
6. 3.4.3. Appliances connected to a flue for the dispersal of combustion products shall be so designed and constructed that in abnormal draught conditions there is no release of combustion products in a dangerous quantity into the indoor spaces or rooms concerned.
7. Emissions from the coating process include VOCs (solvents), metal fumes, acid aerosols (electrolytic coating), particulate, and combustion products.
8. Semi-smokeless powders featured bulk volume properties that approximated black powder, but had significantly reduced amounts of smoke and combustion products.
Bột bán không khói có đặc tính khối lượng lớn xấp xỉ bột đen, nhưng đã giảm đáng kể lượng khói và các sản phẩm đốt.
9. In particular, among the different sections of Annex I to the Directive which specify those requirements, section 3.4.3 provides that `[a]ppliances connected to a flue for the dispersal of combustion products must be so constructed that in abnormal draught conditions there is no release of combustion products in a dangerous quantity into the room concerned.'
10. The adsorbing layers were selected in such a way, that each of the adsorbed combustion products may be desorbed at any time, independent of the others.
11. Adsorption fluid is constantly fed into the combustion products in a mixing chamber situated at the end of the combustion tube; this fluid contains hydrazine sulfate as reducing agent.
12. According to that provision, appliances must be so constructed that in abnormal draught conditions there is no release of combustion products in a dangerous quantity into the room concerned.
13. 38 With regard to the release of combustion products under abnormal draught conditions, the Commission refers to the harmonised standard EN 297, which relates mainly to open-type heating boilers.
14. This is said to provide that boilers must be fitted with a safety device which stops the appliance operating if the release of combustion products is abnormal for a specified period.
15. Among those requirements is one that appliances must be so constructed that in abnormal draught conditions there is no release of combustion products in a dangerous quantity into the room concerned.
16. Likewise there is no difference with regard to point 3.1.9, as it must be presumed that with both types combustion products may be released in the event of abnormal operation without a safety device.
17. After the combustion products are absorbed, the chlorine or bromine content is determined acidimetrically afterVieböck; the iodine is determined iodometrically by theLeipert method. — The method is not suitable for the analysis of easily volatile compounds.
18. In a conventional steam power plant, a Boiler consists of a furnace in which fuel is burned, surfaces to transmit heat from the combustion products to the water, and a space where steam can form and collect
19. As the Directive does not explain the phrase `in abnormal draught conditions', this must be construed as meaning that under no circumstances may combustion products be released in dangerous quantities into the room where the appliance is used .
20. It is clear from the file that all appliances of that type are, in accordance with harmonised standard EN 297, equipped with a safety device which blocks the functioning of the appliance where the dispersal of combustion products is abnormal during a specified period.
21. The second step includes the densification and near net shape forming of such combustion products by semi-solid metalworking or die casting techniques provides alow cost, fast production method for many articles made of high temperature materials such as intermetallics, ceramics and their composites.
22. A dryer drum coater (110, 310) has an internal recirculation cylinder (200, 400) for promoting the recirculation of combustion products so as to entrain and incinerate blue smoke formed when heated and dried virgin aggregate is mixed with other asphaltic products such as RAP and/or liquid asphalt in the dryer drum coater.
23. 26 It states in particular that harmonised standard EN 297, adopted by the European Standardisation Committee (OJ 1995 C 187, p. 9), which concerns inter alia `open' boilers, provides in section 3.5.8 that boilers must be equipped with a safety device which blocks the functioning of the appliance where the dispersal of combustion products is abnormal during a specified period.
24. GAS-TURBINE PLANTS; AIR INTAKES FOR JET-PROPULSION PLANTS; CONTROLLING FUEL SUPPLY IN AIRBREATHING JET-PROPULSION PLANTS (construction of turbines F01D; jet-propulsion plants F02K; construction of compressors or fans F04; combustion apparatus in which combustion takes place in a fluidised bed of fuel or other particles F23C 10/00; generating combustion products of high pressure or high velocity F23R; using gas turbines in compression refrigeration plants F25B 11/00; using gas-turbine plants in vehicles, see the relevant vehicle classes) Notes