Nghĩa của từ combustion process bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-quá trình cháy

Đặt câu có từ "combustion process"

Dưới đây là những mẫu câu có chứa từ "combustion process", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ combustion process, hoặc tham khảo ngữ cảnh sử dụng từ combustion process trong bộ từ điển Từ điển Anh - Việt

1. In other words, the Azeotropism dominates the combustion process at this stage

2. Actually the body utilizes a combustion process, and heat is derived from oxidation.

3. Effects of main operation parameters of the incinerator system on stable combustion process are analyzed.

4. The method that combustion pressure pulsation is reconstructed from vibration signals, is valuable for diagnosis of combustion process.

5. Fuel injector Atomizes fuel into a very small fuel particles ensuring every small droplet of fuel vaporize and undergo the combustion process

6. The Total Base Number (TBN) can be described as a measure of oil′s ability to neutralise strong acids created during the combustion process.

7. The operation results show that the fuzzy control can overcome anneal furnace combustion process above difficulties, has stronger robustness, and can obtain satisfactory control effect.

8. With a continuous supply of heat (furnished by the Combustion process itself), the ignition of additional fuel will continue as long as there is enough oxygen present.

9. The study showed the correctness of the combustion process model and the modified flame propagation formula can be used to simulate the performance of gasoline rotary engine.

10. The development of new aero-engine concepts relies heavily on computational fluid dynamics (CFD) modelling to evaluate the effect of different design features on combustion process and emissions.

11. Bioenergy and Sustainability Biodiesel is a renewable fuel with high oxygen content that results in an improved combustion process, less soot and reduced deposits compared to conventional or

12. 5 Adiabatic Flame Temperature For a combustion process that takes place Adiabatically with no shaft work, the temperature of the products is referred to as the Adiabatic flame temperature

13. According to MMWR, the “accumulation of CO may be associated with any combustion process occurring indoors (e.g., home heating, cooking, or a running vehicle or gasoline- powered tool) —particularly when ventilation is inadequate.”

14. Anthracite is shiny black, hard and brittle (see Figure 2.8) and has the highest fixed-carbon content (approximately 86–98%).Due to its low volatile matter (2–12%), Anthracite's combustion process is slow

15. Definition of Antiknock : serving or intended to prevent detonation in the combustion process of an internal-combustion engine an Antiknock agent an anti-knock fuel additive First Known Use of Antiknock 1921, in the meaning defined above

16. Up to 6% cash back  · Air is a crucial part of the combustion process, and a restricted Carburetor can critically upset the air/fuel balance necessary for an engine to start and run smoothly

17. Backfiring is the process of a spark plug, or multiple spark plugs, igniting the fuel in their cylinder out of turn, in a part of the combustion process where the exhaust valve is open on that cylinder

18. The cycle comprises a multi-stage compression interstage cooling process, a counter-flow heat exchange process, a timing constant volume combustion process and an adiabatic expansion process, and is a thermodynamic cycle where thermal energy is converted to mechanical energy.

19. The lecturer analyzed the limitations of these concepts and illustrated the solution found for BMW's newly developed spray-guided combustion process. He then elaborated on the fuel efficiency potential of this concept and the challenges associated with the implementation of this technology in real-world vehicles.

20. Hydrogen can be used in chemical reactions (e.g. production of ammonia, hydrogen peroxide, hydrochloric acid, and methanol; reduction of organic compounds; hydrodesulphurisation of petroleum; hydrogenation of oils and greases; chain termination in polyolefin production) or as a fuel in a combustion process to produce steam and/or electricity or to heat a furnace.