Nghĩa của từ change-speed gear bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-hệ truyền biến tốc

Đặt câu có từ "change-speed gear"

Dưới đây là những mẫu câu có chứa từ "change-speed gear", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ change-speed gear, hoặc tham khảo ngữ cảnh sử dụng từ change-speed gear trong bộ từ điển Từ điển Anh - Việt

1. by degradation or change in: e.g. engine, gear, brake, suspension, active steering, speed limitation devices;

2. — ►M5 by degradation or change in: e.g. engine, gear, brake, suspension, active steering, speed limitation devices ◄

3. When the navigator unbinds a cluth, the driving gear of engine will link up with speed change gear up, make the dynamic force spread to wheel thus up.

4. Move this lever to change gear.

5. 30 When the navigator unbinds a cluth, the driving gear of engine will link up with speed change gear up, make the dynamic force spread to wheel thus up.

6. A roller gear, especially a toroidal gear, with an infinitely variable speed increase ratio.

7. She made a smooth gear change.

8. The gear change is slick and rapid.

9. The transmission further comprises: gear change linkages (50, 50') connected between the driving pulley and the driven pulley for adjusting a gear ratio by axially translating each of the conical wheels constituting the driving pulley and the driven pulley; and a gear change actuator (60) connected to the gear change linkages (50, 50') for receiving a gear change input from the outside and actuating the gear change linkages (50, 50').

10. A gear shift light shows optically the optimal timing for gear shifting based on a preadjusted engine speed.

11. You should change gear the engine's starting to labour.

12. A change of speed, like a whirlwind.

Một sự thay đổi nhanh chóng, như một cơn gió lốc.

13. He told us when to indicate and when to change gear.

14. You can change into a higher gear now you're going faster.

15. A type of miter gear where one gear (sometimes called a pinion) is smaller than the other, Bevel gears provide right-angle speed reduction at speed ratios ranging from 2: 1 to 5:1

16. A retractable wheel landing gear is optional and adds five kts to cruising speed.

Bộ phận đáp bằng bánh xe co rút được là một tùy chọn và thêm five kts nhằm tăng tốc độ.

17. Transmission components for land vehicles of all kinds, in particular gears, motors, gear motors, and gear motors with electric and mechanical adjustable speed mechanismms

18. You'll need to change into a lower gear when going up this hill.

19. Good average speed requires a gentle, smooth and regular driving style avoiding any unnecessary change of speed.

20. The GIpro reads the Gear Position Sensor directly, while other units, such as Acumen DG8 and Datatool DiGi compute gear position from engine and wheel speed.

21. Accelerated speed of operation is attained upon the return stroke as a function of gear sizing.

22. The speed limitation function shall permit a normal use of the accelerator control for gear selection

23. Hint: Shift the gear when the speed-o-meter arrow enters the Green or Blue Zone.

24. 28 As ever: the gear change and clutch are heavy; the throttle response terrific.

25. Differential Calculus is based on rates of change (slopes and speed)