Nghĩa của từ sintering bằng Tiếng Đức
sintering [sintəriŋ] Sinte
Đặt câu có từ "sintering"
1. The transparent adhesive/bonding agent has adhesive properties before sintering, and bonding properties after sintering.
2. * - Plain shaft bearings , obtained by sintering : * *
* - Lagerschalen , durch Sintern hergestellt * *
3. Calcination and sintering are two different pyrometallurgical processes
4. Method for determining sintering shrinkage of a presintered body
Verfahren zum bestimmen des sinterschwunds eines vorgesinterten körpers
5. Rail concentrates covered processing sintering, iron ore processing.
6. Rail concentrates covered processing and sintering, iron ore processing.
7. 6 Formation mechanism of sintering cemented carbide pockmarks is studied.
8. * - Pistons and rod guides for shock absorbers , obtained by sintering * 20 *
* - Kolben und Führungen für Stoßdämpfer , durch Sintern hergestellt * 20 *
9. * - Pistons and rod guides for shock absorbers , obtained by sintering *
* - Kolben und Führungen für Stoßdämpfer , durch Sintern hergestellt *
10. The shrinkage of cremated bones is due to sintering of bone mineral.
Als besonders wesentlich wird die Sinterung des Knochenminerals bei höheren Temperaturen hervorgehoben, da sie als Ursache der Wärmeschrumpfung von Knochen anzusehen ist.
11. The effect of the sintering temperature on the degrease performance is obvious.
12. The additives such as NaCl also accelerated sintering thus increasing the pore size.
Additive wie NaCl beschleunigen das Sintern und somit die Zunahme der Porengröße ebenfalls.
13. (c) Material temperatures of about 1,450° C in the sintering zone of rotary kilns;
14. In this case, we can see a laser sintering machine developed by EOS.
15. Some SLS machines use single-component powder, such as direct metal laser sintering.
16. The activating and sintering characteristics of hydroxyapatite agglomerate treated by shock wave were studied.
17. The agglomeration and sintering of fine particles can necessitate a lowering in temperature of operation.
18. The key difference between Calcination and sintering is that Calcination is the heating of metal ore to remove impurities, whereas sintering is the heating of metal ore to weld together small particles of a metal.
19. Introduction Crystallite coarsening, commonly referred to as sintering, is a major cause of catalyst deactivation
20. Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature.
21. (c) Material temperatures of about 1,450° C in the sintering zone of the rotary kiln;
22. Study of the additives to be used at high temperatures, as sintering aids in metals and alloys.
23. Powder lacquers for coating glass and metals using the fluidised bed sintering process, flame spraying and electrostatic spraying
Pulverförmige Lacke zum Überziehen von Glas und Metallen nach dem Verfahren des Wirbelsinterns, Flammspritzens und elektrostatischen Spritzens
24. Upon compaction and sintering, the iron-based powder and alloy additives form a dual phase alloy system.
25. Sintering happens naturally in mineral deposits or as a manufacturing process used with metals, ceramics, plastics, and other materials.
26. 17 Usually, layer and vertical crack are caused by moulding, and horizontal and reticulate crack are caused by sintering .
27. Also, for reasons of clinker quality, excess air is required in the sintering zone to maintain oxidizing conditions.
28. Most collected dusts and sludges from air pollution control equipment are returned to the smelting or sintering processes
29. The sinter plant includes all the plant for sintering prior to being charged into the balst-furnace and to agglomerate.
Sinter- und Pelletieranlagen umfassen alle Anlagen, die dazu dienen, die Bestandteile des Möllers vor ihrem Einsatz im Hochofen stuckig zu machen.
30. The curvilinear shape of sprocket wheel is the main cause of arching phenomenon of sintering pallets in the return rail.
31. Traumatic vertebral body fractures are different from the osteoporotic vertebral sintering fractures with regard to accruement, classification and surgical treatment.
Die traumatischen Wirbelsäulenfrakturen bei vorliegender Osteoporose müssen obligat von der osteoporotischen Sinterungsfraktur in Bezug auf Entstehung, Klassifikation und operative Behandlung abgegrenzt werden.
32. The blocks of N-type pseudo-ternary thermoelectric materials were prepared with the powders by cold-pressing and sintering methods.
33. These disperse composite materials (DCM) have specific properties of abrasion or wear resistance, friction, catalytic action or sintering e.g. for high temperature superconductors.
34. The hackle screens are mainly used in the shaking screen classification attachments that are in iron-smelting plants and sintering ones of metallurgical industry.
35. AlNiCo: Magnetic alloy composed of Aluminum, Nickel, Cobalt, Iron and other additives - produced by casting or sintering - can only be processed by grinding and cutting.
Alterung: Zeitliche Änderung der magnetischen Eigenschaften, besonders der scheinbaren Remanenz eines Dauermagneten; kann durch künstliche Alterung (thermisch, magnetisch, mechanisch) herabgesetzt bzw. vorweggenommen werden.
36. Sintering that uses an arc produced via a capacitance discharge to eliminate oxides before direct current heating, was patented by G. F. Taylor in 1932.
37. LENS is similar to selective laser sintering, but the metal powder is applied only where material is being added to the part at that moment.
38. Thus, the internal stress due to shrinkage is relieved through a slit, and when a slit closes after sintering it forms a uniform cylindrical sintered body.
39. 21 The product is made of high quality low-carbon steel with sintering porous bronze as its interlayer, with the compound of POM as its surface.
40. 13 Based on the characteristics of raw materials, the laboratory sintering experiments with different coke size were conducted to find the proper partical size of coke.
41. Said material is prepared by hydrolysing a mixture comprising an alkoxide selected from Zr, Ti or Sn and lithium hydroxide and then drying and sintering the product obtained.
42. Additive Intelligence is using machine learning to solve the problem of deformation during the sintering of metal 3D printed parts, making metal Additive manufacturing fast, scalable, and cost
43. Activated kieselguhr and other activated natural mineral products; animal black, whether or not spent (excl. activated carbon, calcinated diatomite without the addition of sintering agents and activated chemical products)
Kieselgur, aktiviert, und andere aktivierte mineralische Stoffe sowie Tierisches Schwarz, auch ausgebraucht (ausg. Aktivkohle, calcinierte Diatomeenerde ohne Zusatz von Sinterungsmitteln sowie aktivierte chemische Erzeugnisse)
44. The powder fed directed energy process is similar to Selective Laser Sintering, but the metal powder is applied only where material is being added to the part at that moment.
45. The structure thereof is characterized in that the pot body is manufactured by sintering argil; and the bottom surface of the interior of the pot body is combined with the metal layer.
46. There is provided a dielectric ceramic composition having a high relative permittivity, a high frequency-quality factor, a small absolute value temperature coefficient, a low sintering temperature, and unreactivity with an internal conductor material.
47. Like other powder-bed processes, surface finish and accuracy, object density, and—depending on the material and process—part strength may be inferior to technologies such as stereolithography (SLA) or selective laser sintering (SLS).
48. Selective laser sintering uses a laser to trace out the shape of an object in a bed of finely powdered material that can be fused together by application of heat from the laser.
49. By a related technique, the ancient Egyptians produced a pigment known as Egyptian Blue, also called blue frit, which is produced by fusing (or sintering) silica, copper, lime, and an alkali such as natron.
50. The method comprises the steps of forming a mixture containing an aluminium powder or an aluminum alloy powder or both and optionally ceramic particles, a binder, and a sintering aid comprising a low melting point metal.