Nghĩa của từ vertical shaft motor bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-động cơ kiểu đứng

Đặt câu có từ "vertical shaft motor"

1. Vertical shaft type darius windmill

2. Wind power generator using vertical shaft scheme

3. This duct leads to a vertical air shaft.

4. This duct leads to a vertical air shaft

5. The motor shaft is connected to the gear shaft using a flexible Coupler

6. Belt pulley for the output shaft of a gear, gear, electric motor, and output shaft.

7. According to Skye's satellite spectrometry, there's a vertical shaft under this fort.

Theo hình ảnh quang phổ từ vệ tinh của Skye, có một đường hầm dưới pháo đài này.

8. Vertical turbo blower, and high-speed motor used for same

9. The plot below compares the shaft angle and shaft speed of the stepper motor in stepped and Averaged mode

10. A first motor has an output shaft and an agitator belt selectively drivingly connecting the motor to the agitator.

11. Aileron servo pull rod should be vertical to the shaft of aileron basically. Sentencedict.com

12. To improve these properties the aggregate can be cubicised in a vertical-shaft impact crusher.

13. Elegant enclosure made by valuable log, together with gilding vertical shaft and beautiful curlicue shows magnificence.

14. Elegant enclosure made by valuable log[Sentencedict.com], together with gilding vertical shaft and beautiful curlicue shows magnificence.

15. A surgical tool system including a handpiece with a motor and a cutting accessory with a shaft that is rotated by the handpiece motor.

16. Francis turbines are almost always mounted with the shaft vertical so as to isolate water from the generator.

Các tuabin Francis hầu như luôn được gắn với trục dọc để cô lập nước từ máy phát điện.

17. The turbine consists of a number of curved aerofoil blades mounted on a vertical rotating shaft or framework.

18. The workers go down to the tunnels through a vertical shaft sunk from the top of the cliff.

19. The adjustable drive shaft assembly is coupled to the motor and configured to couple with the feed roll.

20. The other end of the drive shaft includes a mounting flange (9) adapted for connection to the motor.

21. Coupling is a component used to connect a drive shaft and a driven part, for example, a motor shaft and a ball screw for the purpose of transmitting the torque

22. Looking up, he found he was standing under a short vertical shaft, at the top of which was another trapdoor.

23. The angle adjustor(3) comprises a motor(3-1) whose output shaft is equipped with a crank(3-2).

24. There is a direct Coupler between the rotating throttle shaft and the motor - there are no cams, arms etc

25. Device for adjusting the rotational speed of a wind motor rotor provided with a vertical axis of rotation