Nghĩa của từ vapour temperature bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-nhiệt độ hơi
Đặt câu có từ "vapour temperature"
1. These three parameters, determined by fitting vapour pressure, vapour volume and liquid volume, are all function of temperature.
2. The change from water vapour to liquid water, resulting from a drop in temperature of an air vapour mixture.
3. A mixture of clean dry air and water vapour for which the vapour pressure (density) is less than the saturated vapour pressure (density) at the same temperature.
4. Figure 13 shows how the vapour pressure of water increases with temperature.
5. For PObmax: Vapour pressure at maximum absolute liquid surface temperature in kPa read
6. The increase in vapour pressure with temperature can be explained in terms of the kinetic theory.
7. The temperature at which no further moisture can be added to the air-water vapour mixture.
8. Many Aldehydes are volatile, flammable liquids which at normal room temperature form vapour in explosive concentrations.
9. 16 The increase in vapour pressure with temperature can be explained in terms of the kinetic theory.
10. 28 The increase in vapour pressure with temperature can be explained in terms of the kinetic theory.
11. Upper air: temperature, wind speed and direction, water vapour, cloud properties, Earth radiation budget (including solar irradiance)b
12. When temperature is increased, the partial pressures of both components and the total vapour pressure of the mixture increase.
13. A substance Condenses when the pressure exerted by its vapour exceeds the vapour pressure of the liquid or solid phase of the substance at the temperature of the surface where condensation occurs.
14. The surface temperature actually drops below the ambient air temperature, which then cools the adjacent air and causes any water vapour to deposit on the surface as frost.
15. The amount of water vapour that can be stored in the air can be increased simply by increasing the temperature.
Lượng hơi nước trữ trong không khí có thể được tăng lên bằng cách tăng nhiệt độ.
16. "(i) the absolute vapour pressure (in bar) of the substance at # °C (at the highest temperature during filling, discharge or transport for elevated temperature substances transported above # °C), minus # bar; and"
17. Gasoline, vapour-recovery;
18. At all vapour pressures and compositions below it, the mixture is a vapour.
19. the sum of the absolute vapour pressure (in bar) of the substance at # °C (for elevated temperature substances transported above # °C at highest temperature during filling, discharge or transport), minus # bar; and
20. the absolute vapour pressure (in bar) of the substance at 65 °C (at the highest temperature during filling, discharge or transport for elevated temperature substances transported above 65 °C), minus 1 bar; and"
21. Absolute humidity is the mass of water vapour in a unit volume (this is water vapour density, commonly measured as grams of water vapour per cubic metre).
22. The vapour-compression cycle (20) of another example is a standard vapour-absorption refrigeration cycle.
23. An Azeotrope is a mixture that, at a given pressure (the azeotropic pressure), boils at a constant temperature (the azeotropic temperature), and has the same composition (azeotropic composition) in the equilibrium vapour and liquid phases.
24. (i) the sum of the absolute vapour pressure (in bar) of the substance at 65 °C (for elevated temperature substances transported above 65 °C at highest temperature during filling, discharge or transport), minus 1 bar; and
25. 3(f) Water vapour permeability