Nghĩa của từ turnbuckle bằng Tiếng Việt

@turnbuckle
* danh từ
- (kỹ thuật) đai ốc siết
@Chuyên ngành kỹ thuật
-cái căng
-cái nói có ren
-chão
-đai ốc siết
-rắc co nối (cửa chớp)
@Lĩnh vực: xây dựng
-bộ căng
-bộ căng bằng vít
-êcu vặn tăng đơ
-hộp căng bằng ren
-khớp căng bằng ren
-măng song xiết chặt
-tăng đơ hai đầu
-thanh căng bằng vít
-trục vít căng
@Lĩnh vực: điện
-đai căng
@Lĩnh vực: điện lạnh
-tăng đơ (điều chỉnh lực căng của dây)

Đặt câu có từ "turnbuckle"

Dưới đây là những mẫu câu có chứa từ "turnbuckle", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ turnbuckle, hoặc tham khảo ngữ cảnh sử dụng từ turnbuckle trong bộ từ điển Từ điển Anh - Việt

1. South by southwest, Mr Turnbuckle, heading 2-1-0-0.

Hướng đông nam, ông Turnbuckie, toạ độ 2-1-0-0.

2. The original Bobstay was typically fitted to the boat without a turnbuckle

3. Later boats had a Bobstay fabricated with a turnbuckle included, like ours.

4. 26 While for the equipment structure, they were the sectional area of nozzle, the pitch between screw and its turnbuckle, clearance, rotate speed, and the depth of the whorl on the turnbuckle.

5. The thread of the axle is fastened in the internal screw thread of the turnbuckle.

6. In the most preferred form, the valve actuator (232) is adjustably mounted to the piston (22) by a turnbuckle (238), with the valve actuator (232) and the turnbuckle (238) formed of hexagonal stock for receipt in a wrench.

7. Bucksaw definition: a woodcutting saw having its blade set in a frame and tensioned by a turnbuckle across Meaning, pronunciation, translations and examples

8. For sailboats that do not have an active Backstay that is “played” while sailing, a turnbuckle that can be adjusted without tools is the next best thing

9. Clevises Clevises have to be right hand and left hand threaded when paired with a single rod to allow for tensioning. When used with a turnbuckle, both Clevises will need to be ordered with right hand threads only

10. Nuts (50) fitted to the bolts (30) are assembled to the nut-receiving portions (20) after adjusting the lengths of the bolts (30) to be assembled to the nut-receiving portions (20), thereby preventing the turnbuckle from being loosened.

11. Whether a Clevis is a bent flat bar around a board secured with a pin, two parallel "tangs" or plates with a pin, or a shackle like design at the end of a threaded rod - a Clevis end on a turnbuckle - …