Nghĩa của từ tube thickness gauge bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: vật lý
-calip kiểm độ dày ống
-thước đo chiều dày ống

Đặt câu có từ "tube thickness gauge"

Dưới đây là những mẫu câu có chứa từ "tube thickness gauge", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ tube thickness gauge, hoặc tham khảo ngữ cảnh sử dụng từ tube thickness gauge trong bộ từ điển Từ điển Anh - Việt

1. Hornady Neck Wall Thickness Gauge …Thickness Gauge is a must-have accessory that complements the Hornady Concentricity Tool

2. This video covers working principle of Bourdon tube pressure gauge, construction of pressure gauge, working Bourdon tube pressure gauge, and advantages and d

3. The Aerosol SEAM Thickness Gauge provides objective and repeatable Double Seam Thickness measurements; required for reliable trend analysis.

4. Automatic gauge control system in double-stand reversing cold mill is introduced. This system is consists of regulating device, thickness gauge and tachometer.

5. The minimum flange thickness (Sd) for 1 520 mm track gauge network is 20 mm

6. The Bourdon gauge consists of a tube bent into a coil or an arc

7. According to the present invention, it is possible to form a flange by bending a tube while maintaining a uniform thickness of the tube.

8. Bourdon tube pressure gauges are used for the measurement of gauge pressures from 0.6 7,000 bar

9. Anemometer - a gauge for recording the speed and direction of wind wind gage, wind gauge gauge, gage - a measuring instrument for measuring and indicating a quantity such as the thickness of wire or the amount of rain etc.

10. - the values actually measures for the outside diameter of the steel tube and for the wall thickness,

11. the values actually measured for the outside diameter of the steel tube and for the wall thickness,

12. the values actually measured for the outside diameter of the steel tube and for the wall thickness

13. the values actually measures for the outside diameter of the steel tube and for the wall thickness

14. - the values actually measured for the outside diameter of the steel tube and for the wall thickness,

15. — the values actually measures for the outside diameter of the steel tube and for the wall thickness,

16. Other articles where Bourdon-tube gauge is discussed: pressure gauge: The Bourdon-tube gauge, invented about 1850, is still one of the most widely used instruments for measuring the pressure of liquids and gases of all kinds, including steam, water, and air up to pressures of 100,000 pounds per square inch (70,000 newtons per square cm)

17. Tube Bending Basics Part 1 covers the general knowlege regarding materials, dies, benders, Center Line Radius, Bending gauge and cheater creation

18. The Bourdon pressure gauge uses the principle that a flattened tube tends to change to a more circular cross-section when pressurized

19. On double-Butted tubes the thickness of the tubes at both ends is thicker than in the centre, so a typical double-Butted tube (0.8/0.5/0.8) would have a thickness of 0.8mm at end (1), a taper

20. Strain gauge

21. A soft, bendable tube about the thickness of the index finger is gently inserted into the anus and advanced into the rectum and the colon.

22. Siletzia's actual thickness, and the estimates of that thickness, vary.

23. Pressure gauge.

24. Briguing Bandanar Bandanna Bestain Breadfruit Burrow Beta-ray Backscatter Thickness Gauge Bay Ice Brass-plate Beerines Blotter Powder Breeziness Baffle Barrage Baltimore Beatitudes Beaverteen Bait Bunchy Bunter Bott Stick Bechamel

25. The pantograph gauge differs in some aspects from the obstacle gauge: