Nghĩa của từ theoretical flame temperature bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-nhiệt độ ngọn lửa lý thuyết

Đặt câu có từ "theoretical flame temperature"

1. Flame speed is used along with adiabatic flame temperature to help determine the engine's efficiency.

2. 5 Adiabatic Flame Temperature For a combustion process that takes place Adiabatically with no shaft work, the temperature of the products is referred to as the Adiabatic flame temperature

3. It has good flame - retardant property, high temperature stability and low - temperature anti - cracking property.

4. The draft ratio (actual/theoretical) correlated directly with the emission temperature.

5. Gas turbine engine combustor circumferential acoustic reduction using flame temperature nonuniformities

6. The experiments on the flame temperature, measured by line-reversal, show that spraying organic liquids into the flame may result in an increase or a decrease of flame temperature, according as the gas-air mixture is lean or rich.

7. The flame exhaust and ambient air are mixed within the flame filter (36) and produce an air stream of intermediate temperature.

8. The temperature of the air stream can be controlled by adjusting the amount of flame (46) supplied to the flame filter (36).

9. The simulation results show that when preheated air temperature increases the maximum temperature gets larger, the temperature gradient becomes lower and the flame length longer.

10. 23 The higher flame temperature might facilitate the use of normal Pulverized coal sizes.

11. Lean combustion decreases the fuel to air ratio in the zones where NOX is generated so that the peak flame temperature is less than the stoichiometric adiabatic flame temperature, therefore reducing thermal NOX formation.

12. Acetylene is a fuel gas, based on carbide production, with a very high flame temperature.

13. (a) Maximum temperatures of approximately 2,000° C (main firing system, flame temperature) in rotary kilns;

14. (61) Acetylene is a fuel gas, based on carbide production, with a very high flame temperature.

15. With the above analysis, the design reliability of the CLX3 flame proof rubber tyre forklift was improved from the theoretical point.

16. By theoretical calculation, it is found that the same earth temperature gradient leads to the greater difference of temperature stress in different kind of rocks.

17. Absolute Zero The theoretical temperature at which materials have no thermal energy (and presumably would not deteriorate).

18. 27 The combustion wave temperature profiles and flame structures of fuel-rich propellant containing boron are measured by using W-Re micro-thermal couple and flame photo technique.

19. By controlling the flows in this way, a calculated energy output or adiabatic flame temperature can be produced.

20. Show detail calculation on how adiabatic flame temperature is determined when Butane is Combusted with 0% excess air

21. A0560 Adiabatic lapse rate Theoretical temperature lapse rate of a parcel of air which moves adiabatically in the vertical.

22. A Blowtorch controls the ratio of fuel gas and oxygen in order to control the flame and its temperature.

23. Although the flame appears to be the same temperature as my hand, it's actually about 2, 000 degree Celsius.

24. Bulwark Flame Resistant Clothing, Flame Resistant Coveralls, Flame Resistant Shirts, Flame Resistant Pants, Flame Resistant Jackets, Flame Resistant Lab Coats & Accesories CALL US: 877 453-3204 Sign in Register View Cart Checkout Need help?

25. 16 Rest ruction 3-D flame temperature field using one stationary camera system with high speed is put forward in the paper .