Nghĩa của từ the screw bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-tháo ốc
-vặn lỏng ốc
Đặt câu có từ "the screw"
1. The screw has come loose.
2. The screw had worked loose.
3. The screw tip is arranged at the end of a front cone portion (3) of the screw.
4. Oil cooler oil filter oil from the oil injection hole after the screw into the screw goes into.
5. I can't get the screw to turn.
6. He managed to work the screw on.
7. The screw connects the implant to the abutment.
8. I gave the screw another two or three turns.
9. Turn the screw to the right to tighten it.
10. The screw was so tight that it wouldn't move.
11. I need to tighten the screw on my glasses.
12. Try and undo the screw to get the whatsit off.
13. 26 The screw was so tight that it wouldn't move.
14. An abutment (15) on one side of the screw head (12) keeps the screw in the slot (16) of the release catch (13) and permits a large passage opening (14) which is significantly larger than a diameter of the screw head (12).
15. The screw has rusted in and can't be got out.
16. I used my thumbnail to tighten the screw on my lamp.
17. It’s easy to use, simply use a screwdriver to loosen the screw, slide in a chew so that it’s centered on Bonehead and tighten the screw down.
18. The screw penetration hole has a diameter which is larger than the maximum diameter of the thread of the screw and the center hole formed in the washer.
19. The screw head comprises a slot configured for receiving a longitudinal member.
20. The further reform proposed amounts to an additional turn of the screw.
21. A twist-off ring (3) is connected to the screw-type closure (4).
22. In a particularly advantageous embodiment, the screw spindle (10) is elastically mounted in the direction of advance of the screw, i.e. in the axial direction, and possibly also in the radial direction.
23. If necessary, adjust by turning the screw on the front of the galvanometer.
24. 16 Who Wants to Unfasten the Screw of Fixed Exchange Rate of RMB?
25. The screw shank (2) is composed of a thread section (10), which has the screw tip (4), and an adjoining thread-free shank section (12) which has the force application point (6).
26. The upper abutment and the fixture are coupled and fixed by the screw post.
27. Following the Greek invention of the screw, wine presses became common in Roman villas.
Sau khi người Hy Lạp phát minh ra ốc vít, máy ép rượu vang đã trở nên phổ biến trong các căn nhà sang trọng của người La Mã.
28. The Addax Antelope is a desert antelope also known as the screw-horn antelope
29. Use a smaller torque value for aluminum jaws to avoid distorting the screw seats
Sử dụng một nhỏ mô- men xoắn đáng nhôm hàm để tránh méo mó ghế vít
30. The screw applications may be adjusted to the desired compression and dynamization level (distance).
31. The width of the slot is somewhat smaller than the diameter of the screw.
32. Operation of the actuator causes longitudinal movement, through the screw mechanism, to the plunger.
33. The screw engages a translatable, non rotatable actuating head (29) through a swivel connection.
34. A snapping slot (13) is disposed on an inner wall of the screw base (1).
35. A pin (16) moves endwise in the screw and its endwise motion adjusts ink flow.
36. The screw connection is prestressed and is configured with a defined fracture cross section (12).
37. The screw plug has a screwdriver slot and the smooth disc has a central lifting hole
38. The screw head further includes a pair of diametrically opposed arms, a socket and a slot.
39. 27 During to processed by special technique, the screw is endurable,[www.Sentencedict.com] fatigue - resistant and durable.
40. So as to allow better use of the torque transmission device with a rotary impact screwdriver, the torsional angle of the stop section (20, 20") in the screw tightening direction is greater than in the screw loosening direction.
41. The screw-plug has a screwdriver slot and the smooth disc has a central lifting hole.
42. The screw plug has a screwdriver slot and the smooth disc has a central lifting hole.
43. The screw compressor is connected to the power unit to be driven thereby for compressing air.
44. Use of special instruments with a slotted sleeve connected to the screw head for rod implantation.
45. The screw-plug has a screwdriver slot and the smooth disc has a central lifting hole
46. They are divided into segments. This enables the screw geometry to be adapted to the respective application.
47. Magnets with Countersunk / counterbore mounting holes allowing them to be screwed in place with the screw head flush
48. A screw angle measurement device has a screw shaft (10) for transmitting a torque to the screw head.
49. The screw slots are machined in the form of a T and are provided in the replaceable head.
50. The screw coupler shall be designed such that in-train forces cannot cause the coupler to unscrew involuntarily.