Nghĩa của từ terminal clamping screw bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: điện
-vít đầu kẹp
-vít hãm đầu dây

Đặt câu có từ "terminal clamping screw"

1. Transport containers and accessories, namely clamping elements, screw fittings, terminal strips, hooks

2. Method for producing a screw connection terminal

3. Choose from our selection of set screw shaft Collars, clamping two-piece shaft Collars, clamping shaft Collars, and more

4. Carr Lane Clamping Pins are threaded alignment pins that can be used for locating and Clamping, or Clamping only, depending on the screw length selected

5. Release the outer knurled ring by rotating the clamping screw anti-clockwise .

6. Hand tools, pliers, wrenches, screw drivers, hammers, clamping chucks, screw taps, combination wrenches, nailing guns, long nose radio pliers, socket wrench sets

7. A wide variety of Bootlace ferrule options are available to you, such as crimp terminal, screw terminal

8. Their plated-steel screw is very durable, and the pin handle gives you the grip for secure Clamping

9. Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units — Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)

10. Connecting devices — Electrical copper conductors — Safety requirements for screw-type and screwless-type clamping units — Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)

11. Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)

12. A preferred application of the inventive method is the production of special screw threads on screw-on hip cups e.g., with almost any clamping, neutral or clearance angle of the thread wings.

13. The abutment face (7) integral with the neck (1) is a terminal screw thread runout face (7).

14. The connection part(13) is provided with a fixed slot(2) and the clamping screw(5) is installed in the fixed slot(2).

15. Wire clamping device

16. Hilitchi Clamping Hex Shaped Hand Knob Handle Replacement Handle Black Plastic Knob Grip Screw On Type Stud with Nuts and Washers (Assortment Kit-135PCS) 5.0 out of …

17. To put Clamping into perspective, pseudocode for Clamping is as follows:

18. Hand-operated clamping tools, in particular three-jaw chucks, four-faced clamps, chucks, clamping vices, receiving mandrels, expanders, clamping sleeves

19. Air spring clamping assembly

20. Research and development relating to clamping elements and clamping systems, in particular clamping elements and clamping systems in mechanical engineering, vehicle construction, aircraft construction, shipbuilding, oil production engineering, oil transportation, power generation industries

21. Clamping Technology,The hydraulic Clamping process consists of properly applying the forces created by a hydraulic Clamping system to secure a workpiece

22. Mold clamping device, mold clamping method, and mold thickness adjusting method using the device

23. Hand-operated clamping tools and clamping instruments, namely spring clamps and ratchet clamps

24. Before the mid 1950s, the term early Clamping was defined as umbilical cord Clamping within 1 minute of birth, and late Clamping was defined as umbilical cord Clamping more than 5 minutes after birth

25. This Clamp is limited only by the length of the pipe you supply; Four plate clutch for high Clamping pressure, quick release; Heavy duty lead screw; Cast steel construction