Nghĩa của từ small specimen bending test bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-sự thí nghiệm uốn mẫu bé

Đặt câu có từ "small specimen bending test"

Dưới đây là những mẫu câu có chứa từ "small specimen bending test", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ small specimen bending test, hoặc tham khảo ngữ cảnh sử dụng từ small specimen bending test trong bộ từ điển Từ điển Anh - Việt

1. The maximum Compressive stress that can be sustained by the test specimen during a Compressive test

2. Force versus angle requirement in static lower legform impactor bending certification test

3. This is demonstrated in the introduction by means of a bending strength test.

4. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

5. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.

6. And, withal, 1 scale specimen can be employed in simulation test that can avoid appearing the 'distortion' in the scale-down test.

7. Biochips are small specimen trays onto which biological material has been applied for analysis

8. Normal kidney from a nephrectomy specimen with a small renal adenocarcinoma served as a control.

9. There should be no possibility of extra forces in addition to the test force acting on the specimen.

10. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined.

11. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorised in 2.2.7.4.6.

12. This follow-up specimen should be collected within 24 hours of the original test, if possible, and no more than 48 hours after the Antigen test

13. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorized in 2.2.7.4.6.

14. The Corrugated paperboard shall be tested for bending resistance by adapting TAPPI T-556 to confirm that minimum acceptable stiffness, listed below, is met, except that for each specimen tested the corrugations shall run in the long direction of the specimen.

15. Accordingly, the nano-hole electrode shows a very low change in electrical resistance during a bending fatigue test.

16. Bending tool assembly for determining the bending angle

17. In addition to the test report number a test code consisting of up to eight characters (e.g. ABC#) shall indicate the test results applicable to the identifiers and the test specimen, which is described by the details given in paragraph #.# above

18. To this end the instrumented notched bar impact bending test is performed on unirradiated samples of the pressure vessel steel.

19. Many miles from camp they came upon a small specimen partially coated with a frothy greenish-tan crust.

20. In addition, the Biopsy specimen is very small and may miss the cancer and, therefore, may not provide

21. An accelerated weather testing apparatus includes a test chamber, a lamp (16), a dispenser (18, 20), and a specimen support (14).

22. Small Test Tube and Stopper ( or jar with a lid ).

23. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

24. 30 Many miles from camp they came upon a small specimen partially coated with a frothy greenish-tan crust.

25. A fine specimen!

Một sự kỳ quái tốt đẹp!