Nghĩa của từ shifting cam shaft bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-trục cam điều chỉnh

Đặt câu có từ "shifting cam shaft"

Dưới đây là những mẫu câu có chứa từ "shifting cam shaft", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ shifting cam shaft, hoặc tham khảo ngữ cảnh sử dụng từ shifting cam shaft trong bộ từ điển Từ điển Anh - Việt

1. Cam shaft device and method for manufacturing shaft and cam shaft device

2. Method for producing a constructed cam shaft and cam shaft

3. The upper cam shaft and the lower cam shaft can have variable lobes.

4. The plunger cam is coupled to the cam shaft.

5. Method for producing a brake cam shaft and a brake cam shaft produced according to said method

6. Effective length of the cam shaft

7. The pump shaft and the cam shaft are not simultaneously rotated.

8. Cam shaft/cam gear assembly and thrust strategy for engine using same

9. Effective length of the cam shaft: mm

10. Cam drive for actuating a selector shaft

11. Crank case, crank shaft, cam shafts, sumps;

12. Effective length of the cam shaft: ... mm

13. The adjustment device is used for cam shaft adjustments that change the angle position between the crank shaft and the cam shaft during operation of the engine.

14. The rotary cam may be operatively connected to a drive shaft or power take off shaft.

15. The cam (7) is joined to the drive shaft (6).

16. A cam supported by the shaft defines a cam surface against which a switch actuating plunger bears.

17. Roller bearing, cam shaft support structure, and internal combustion engine

18. The clamping mechanism (16) includes a clamp (20) and a cam shaft (18).

19. The main shaft (4) carries a cam (26) which engages with the rocker.

20. Engine cooling systems, emission control parts, actuators and throttle bodies, starter motors, oil coolers, radiators, cam shafts and cam shaft bearings

21. There is a torque cam mechanism which has resetting function on the middle shaft.

22. By the change to the electronic ignition the complete mechanical unit will be replaced and adjustment shaft and cam shaft will be firmly connected.

23. The manual adjustment mechanism (10) also includes a cam driver coupled to the output shaft (14).

24. The drive shaft is still capable of rotating because of its free mounting in the cam track.

25. Method for producing a cam that can be placed on a hollow shaft to form a camshaft