Nghĩa của từ screw, torque bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-vít ngẫu lực

Đặt câu có từ "screw, torque"

Dưới đây là những mẫu câu có chứa từ "screw, torque", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ screw, torque, hoặc tham khảo ngữ cảnh sử dụng từ screw, torque trong bộ từ điển Từ điển Anh - Việt

1. A screw angle measurement device has a screw shaft (10) for transmitting a torque to the screw head.

2. Use a smaller torque value for aluminum jaws to avoid distorting the screw seats

Sử dụng một nhỏ mô- men xoắn đáng nhôm hàm để tránh méo mó ghế vít

3. Cost-effective 230 Volt Electric Screw Driver with Push-Start and a torque range of 0.25 - 2 Nm.

4. Electronic measuring spanners for screw tightening, in particular for measuring torque and/or torsion angle and/or yielding point

5. Brake factor (input torque to output torque amplification ratio)

6. So as to allow better use of the torque transmission device with a rotary impact screwdriver, the torsional angle of the stop section (20, 20") in the screw tightening direction is greater than in the screw loosening direction.

7. Thus, upward, downward, left and right vibration of a screw caused by external impacts can be prevented so as to avert autonomous disengagement of the screw, and effectively prevent a reduction of disengaging torque arising from repeated use.

8. Torque rod assembly and method for manufacturing torque rod

9. Wide open throttle, and torque feedback < 95 % torque reference

10. Torque measuring device

11. Torque fluctuation absober

12. Adaptive torque plates

13. Cancellous SCREW: A Cancellous bone screw is a modified wood-type screw

14. The torque and the speed are to be measured by the torque meter.

15. Variable reluctance torque coupler

16. Torque converter for vehicle

17. Spare parts for torque spanners, torque screwdrivers, torsion angle spanners and electronic measuring spanners

18. Abutment screw and turning tool for an abutment screw

19. Adjusting screw

20. Method for producing a screw anchor and screw anchor

21. Limited angle torque motors

22. Screw poetry.

Dụt bỏ thi ca đi, Oliver.

23. Coupling is a component used to connect a drive shaft and a driven part, for example, a motor shaft and a ball screw for the purpose of transmitting the torque

24. Ball screw, manufacturing method of nut for ball screw

25. Brushed vs Brushless Motor Torque