Nghĩa của từ roughness coefficient (of natural rock surface dressing) bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-hệ số mặt gia công nhẵn (của đá thiên nhiên)

Đặt câu có từ "roughness coefficient of natural rock surface dressing"

Dưới đây là những mẫu câu có chứa từ "roughness coefficient of natural rock surface dressing", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ roughness coefficient of natural rock surface dressing, hoặc tham khảo ngữ cảnh sử dụng từ roughness coefficient of natural rock surface dressing trong bộ từ điển Từ điển Anh - Việt

1. Depending on the actual conditions in service different surface properties are required, e.g. roughness, coefficient of friction or the absence of porosity.

2. Surface roughness testing machines and instruments

3. Asperity: Roughness or harshness, as of surface, sound, or climate

4. These properties include subsurface oxidation, surface roughness, surface residual stress, surface orientation and surface structure, etc.

5. Exterior wall metal sheet made of aluminium having a high surface roughness

6. kL is the low-adhesion surface coefficient.

7. kL is the low-adhesion surface coefficient

8. The effects of wood surface roughness and urea concentration on contact angles were investigated.

9. Surface roughness is one of the significant machining characteristics in the finish cut of WEDM.

10. Results show that this process can reach surface roughness with angstrom dimension.

11. zR on the surface with the low coefficient of adhesion

12. zRAL on the surface with the low coefficient of adhesion

13. zR on the surface with the high coefficient of adhesion

14. The paper describes the adhesion of algal spores to glass surfaces with different degrees of roughness (surface tension, contact angle and adsorption capacity were taken as indices of roughness).

15. Both dimensional accuracy and surface roughness of the metal handicraft in ceramic mold meet technological requirement.

16. Crusts create a surface roughness that slows the surface runoff of water and may trap soil particles arriving via wind deposition

17. Examples of geometrical quantities are: length, distance, diameter, radius, curvature, angle, tilt, volume, and surface roughness.

18. Surface Asperities, such as roughness characteristics, are reduced or otherwise mitigated via the control of surface regions including the Asperities in different regimes

19. Emissivity corrected radiation pyrometer integral with a reflectometer and roughness sensor for remote measuring of true surface temperatures

20. Soil surface roughness is found to be highly related to the sinuosity, gradient and orientation of runoff path.

21. Boring yields a machining precision of classes 4 or 5 and a surface roughness of classes 2 or 3.

22. You take interpolated data about geometry, and surface roughness, and material properties, and maybe some textures.

23. Aquifers are underground layers of rock that are saturated with water that can be brought to the surface through natural springs or by pumping.

24. In materials science, Asperity, defined as "unevenness of surface, roughness, ruggedness", has implications in physics and seismology

25. Natural aggregates are sand, rock and gravel.