Nghĩa của từ rotary bending and torsion fatigue test bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-sự thử mỏi do quay cuốn và xoắ
Đặt câu có từ "rotary bending and torsion fatigue test"
1. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;
2. Accordingly, the nano-hole electrode shows a very low change in electrical resistance during a bending fatigue test.
3. Optical apparatus for measuring and checking (supervision) of bending angles, pipe constructions, resilience, torsion or geometry
4. The partition (15) compensates for a reduction in the bending and torsion strength of the valve shaft (12).
5. Just like torsion, in pure Bending there is an axis within the material where the stress and strain are zero
6. The rotary balance wind test for the aircraft with nose outshoot is completed, and it fills the gap of the rotary balance wind test in domestic aviation.
7. No fatigue cracks ≥1mm shall exist after the test.
8. By the action of high rotary speed, excentric shaft connection intensifies the fatigue failure of tool.
9. Static test was completed for the landing gear, while the aircraft’s fatigue test is in progress.
10. Concrete hollow cylinders subjected to combined compression and torsion were used to simulate concrete airport pavements subjected to biaxial fatigue loading in the compression region.
11. Air resistance reduction device for fatigue test for blade and method for installing same
12. Force versus angle requirement in static lower legform impactor bending certification test
13. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.
14. This is demonstrated in the introduction by means of a bending strength test.
15. All important effects like blade twist, shear deformation and rotary inertia for bending, effect of centrifugal force and stagger angle are taken into account.
16. 2.3 Binormal vector and torsion
17. In this paper, the static strength and the fatigue life of spring for seal flake in radial face on rotary engine is analyzed.
18. Rotary tools, rotary brushes, rotary abrasive wheels, rotary grinding wheels
19. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending
20. Altitudes Panel Main Beam Torsion Spring Bracket Screw Torsion Spring Bracket Wall Torsion Spring Grid Saddle XL Cross Tee Altitudes Panel 1" Nominal Reveal 2" Wall Molding Main Beam Torsion Spring Bracket Torsion Spring Grid Saddle Altitudes ®
21. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined.
22. Torque in bending and torsion* Size Bending Barbed Broachest A B C CW Torsion Size A B C Rasps1" Bending A B C XXXF 18.8 1.1 12.4 2.0 16.0 1.4 XXF 21.2 0.8 21.6 1.7 24.0 0.8 XF 35.4 3.4 30.4 3.0 30.5 1.7 F 55.0 6.2 61.4 1.7 43.5 4.5 M 86.2 3.5 96.4 9.0 65.8 5.6 C 132.6 7.0 99.0 1.4 11.8 0.8 5.4 0.5 15.0 1.6 21.8 1.9 57.6 1.1 90.4 2.7 6.44.7 12
23. Screws that were specifically designed for cement application displayed greatest stability in the fatigue test.
24. 23 A design of differential stress sensor with six magnetic pole based on counter magnetostriction effect of ferromagnetic materials is given, and the torsion test and uni-tension stress test are made.
25. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorised in 2.2.7.4.6.