Nghĩa của từ rivet shank diameter bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-đường kính thân đinh tá

Đặt câu có từ "rivet shank diameter"

Dưới đây là những mẫu câu có chứa từ "rivet shank diameter", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ rivet shank diameter, hoặc tham khảo ngữ cảnh sử dụng từ rivet shank diameter trong bộ từ điển Từ điển Anh - Việt

1. The accompanying Burrs are placed over the end of the belt rivet shank and peened with a hammer to secure the rivet in place

2. HT-178 Hand Rivet Clincher for 5/32" Diameter Tubular Rivets

3. HT-174-WR Hand Rivet Clincher for 1/8" Diameter Tubular Rivets

4. Said holding element (5) comprises a central, cylindrical passage, the diameter thereof being slighter bigger than the diameter of the rivet pin.

5. At the end of the rivet shank (6) remote from the rivet head (4), the cavity (8) is essentially conical in shape, the angle of the aperture being $g(a).

6. All Burs are designed for Turbine Carving Tools with a 1.6mm (1/16") diameter shank

7. This is the diameter of the shank on the interchangeable pilot that is compatible with the Counterbore

8. Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 43 metric series.

9. Air powered hammer riveters and rivet busters and rivet cutters therefor

10. With large diameter handles and terminal shank widths, Hu-Friedy surgical Curettes are designed to deliver superior performance and enhance efficiency.

11. Air powered hammered riveters and rivet busters and rivet cutters therefor

12. 27 Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 43 metric series.

13. Choose from our selection of rivet Clinchers, including tools, rivet setters, and more

14. Rivet supply machines

15. All Buttonholers and monogrammers are designed for a specific category machine: high shank, low shank and angle shank

16. Micro 100 IDRT-80 Brazed Tool Right Hand Square Shank Diameter"Style IDRT", 30.5" Length, 1/2" Width, 1/2" Height, 0.575" Minimum Thread Diameter, 3/4" Neck Length

17. In cooling, the rivet contracts.

18. Anvil design for rivet setting machine

19. Carbide Burrs come in both 1/4" shank and 1/8" shank.

20. The fuselage cracked along the rivet line.

21. Rotary Broach / Wobble Broach Tool Holder 3/4" shank for 8mm shank Broaches

22. Brazier-head rivet definition is - a light buttonhead rivet with a wide shallow head used especially on aircraft.

23. The rivet heads are in good condition and without abrasion.

24. Machining (apparatus for screws, nuts, nail and rivet)

25. Try! can you stir the awful rivet?