Nghĩa của từ rf signal-to-interference ratio bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: điện tử & viễn thông
-tỉ số tín hiệu-nhiễu RF
Đặt câu có từ "rf signal-to-interference ratio"
1. We're trying to get a lock on your signal, but we're getting some RF interference.
Chúng tôi đang cố định vị tín hiệu của anh ở đó, nhưng chúng tôi đang bị nhiễu sóng.
2. Mutual information based signal to interference plus noise ratio estimator for radio link monitoring
3. Acousto-optic rf signal spectrum analyzer
4. The interference pattern is due to interference between the acoustic signal and the at least one refracted signal.
5. Minimizing sampling of the adipose layer greatly reduces interference contributed by the fat band in the sample spectrum, increasing signal-to-noise ratio.
6. Eagle, we're getting a signal interference.
Đại bàng, tín hiệu bị nhiễu.
7. Coupler Coupler Couplers are RF passive devices used for coupling a specific frequency from inputted RF signal
8. An RF/video transmitter generates an RF/video signal in a third segment from among the spectrum segments.
9. Advanced signal processors for interference cancellation in baseband receivers
10. Process for generating a signal indicating adjacent channel interference
11. A digital power amplifier (DPA) generates a radio frequency (RF) signal based on the upconverted signal.
12. The signal to noise ratio of data signal and tracking error signal are improved at the same time.
13. A wideband power coupler and method for taping part of a RF signal from a combined RF and AC signal with simple structure and low number of parts.
14. The electrical connector (1) saves printed circuit board space (19), minimizes parts, and improves switching flexibility in an RF signal amplification device (Figure 2) for amplifying an RF (e.g., CATV) signal transmitted along an RF cable (41), and in a power coupler (Figure 3) coupling an AC power signal (53) into an RF cable (41).
15. The transmitter may receive the control signal and adjust a power of the RF input signal based on the control signal.
16. A bandpass sampling receiver is proposed for receiving RF signals, comprising: the first ADC, for converting the RF signal into the first path of digital signal under the control of the first sampling clock signal; the second ADC, for converting the RF signal into the second path of digital signal under the control of the second sampling clock signal; a signal separating unit, for separating the in-phase signal and the quadrature signal in the first path of digital signal and the second path of digital signal; wherein the frequency of said first sampling clock signal and said second sampling clock signal is 1/N of that of said RF signal, and N is a natural number.
17. • protecting aircraft from potential hazards by prohibiting electronic signal interference; and
18. As the name implies RF Attenuators reduce the level of the signal, i.e
19. Low cost system and method that implements acousto-optic (ao) rf signal excitation
20. A desired signal is demodulated while rejecting interference from adjacent signals.
21. System and method for cancelling interference signals using digital signal processing
22. Crosstalk is the interference of signal transmitted on pair of fibers
23. Multi-valued read-only storage location with improved signal-to-noise ratio
24. Interference Blanker Units (IBU) Each aircraft transmitter issues a “Blanking Request” discrete prior to activation of its RF output stage
25. The Binned example also highlights how binning improves signal to noise ratio