Nghĩa của từ reduction gear ratio (final gear ratio) bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: ô tô
-chỉ số truyền cảm

Đặt câu có từ "reduction gear ratio final gear ratio"

1. M-105R - (1,100 horsepower (820 kW)) Decreased propeller reduction gear ratio for bomber aircraft.

2. A roller gear, especially a toroidal gear, with an infinitely variable speed increase ratio.

3. Adaptive transmissions and transmissions with variable gear ratio

4. || Determination of the anchor point for each gear ratio

5. if one specific gear ratio gives an acceleration in a tolerance band of ± 5 % of the reference acceleration awot ref, not exceeding 2,0 m/s2, test with that gear ratio.

6. if one specific gear ratio gives an acceleration in a tolerance band of ± 5 % of the reference acceleration awot ref, not exceeding 2,0 m/s2, test with that gear ratio,

7. || Vehicles with automatic transmissions, adaptive transmissions and transmissions with variable gear ratio (CVTs)

8. (a) if one specific gear ratio gives an acceleration in a tolerance band of ± 5 % of the reference acceleration awot ref, not exceeding 2,0 m/s2, test with that gear ratio.

9. Vehicles with automatic transmissions, adaptive transmissions and transmissions with variable gear ratio (CVTs)

10. Vehicles with automatic transmissions, adaptive transmissions and transmissions with variable gear ratio (CVTs

11. Tests in acceleration shall be carried out and the acceptance criteria verified for each reduction ratio of gear acceleration allowing in theory the speed limit to be exceeded.

12. Tests in acceleration shall be carried out and the acceptance criteria verified for each reduction ratio of gear acceleration allowing in theory the speed limit to be exceeded

13. Poolvergnuegen Reduction Gear, Aquanaut 200/400, Qty 5

14. the reduction ratio of injection of active power.

15. Write Analytically the solution of the position analysis of the gear-connected five-bar mechanism with the vector circuit equations given the dimensions, gear ratio and phase angle expressions in the figure

16. The transmission further comprises: gear change linkages (50, 50') connected between the driving pulley and the driven pulley for adjusting a gear ratio by axially translating each of the conical wheels constituting the driving pulley and the driven pulley; and a gear change actuator (60) connected to the gear change linkages (50, 50') for receiving a gear change input from the outside and actuating the gear change linkages (50, 50').

17. 19 Cycloid pin gear planetary reducers are widely used in agricultural machinery with their big transmission ratio and high carrying capacity.

18. In case of non-locked transmission conditions, the test may include a gear ratio change to a lower range and a higher acceleration.

19. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory Vadj* to be achieved.

20. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory Vadj* to be achieved

21. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory Vadj* to be achieved.”

22. Proper Camshaft selection is a combination of first and foremost, your experience coupled with the determined usage; engine displacement, compression ratio, fuel system carbureted or injected, RPM range power desired, transmission type/converter stall speed, vehicle weight, final gear ratio, tire height, cylinder head and valves, head flow

23. Acid Test Ratio (Ratio de liquidité relative) See Quick Ratio.

24. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory the set speed to be exceeded.

25. Gear Cards ~ Cogwheel Cards ~ Gear Note Cards ~ Gear Stationery ~ Embossed Gear Notes ~ Note Cards ~ Gears ~ Cogwheel ~ Thank You MyCellarCreations