Nghĩa của từ red peak level bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-mức đỉnh đỏ
Đặt câu có từ "red peak level"
1. the peak level of single accelerating vehicle events.
2. Gasoline prices are 14% below the peak level they hit in November.
3. The antenna is substantially aligned when the signal strength reaches a peak level.
4. Heating collapses the blue spectral peak, causing the violet luminescence to shift towards red.
5. Heat acclimatization lowered the level of the second peak , though it was remarkably prolonged.
6. Elevation ranges from sea level to 1,168 m (3,832 ft) on El Toldo Peak.
Độ cao dao động từ mực nước biển đến 1.168 m (3.832 ft) tại đỉnh El Toldo.
7. Chlordiazepoxide is slowly absorbed and may take several hours to reach a peak plasma level
8. 16 The spectrum level of microseismic noise tends to peak at about 1 / 6 Hz.
9. The highest peak in this range is about 10,000 feet [3,000 m] above sea level.
10. Kita-dake is Sakurajima's highest peak, rising to 1,117 m (3,665 ft) above sea level.
Kita-dake là đỉnh cao nhất của Sakurajima, cao 1.117 m (3.665 ft) so với mực nước biển.
11. The airdrop of the messenger bag from the airplanes is indeed the ultimate peak of the Red Bull Jungfrau-Stafette – and not just because it occurs at almost 4000 meters above sea level.
12. The peak of the highest mountain in Pinghe County (Mount Daqin) is #,# metres above sea level
13. 17 The peak level is above normal, and fasting levels may or may not be elevated.
14. Peak power = (peak potential in volts) × (peak beam current in amperes).
15. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).
16. Peak power» = (peak potential in volts) × (peak beam current in amperes).
17. “Peak power” = (peak potential in volts) × (peak beam current in amperes).
18. 'Peak power' = (peak potential in volts) x (peak beam current in amperes).
19. ‘Peak power’ = (peak potential in volts) x (peak beam current in amperes).
20. ‘Peak power’ = (peak potential in volts) × (peak beam current in amperes).
21. "Peak power" = (peak potential in volts) × (peak beam current in amperes).
22. 19 The Cravens Peak protects unique red sandy dune fields gibber plains semi-permanent waterholes and Coolabah woodlands.
23. 'Peak power' = (peak potential in volts) × (peak beam current in amperes).
24. [Peak power = (peak potential in volts) x (peak beam current in amperes).]
25. Peak power = (peak potential in volts) x (peak beam current in amperes).