Nghĩa của từ quasi-peak value bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: điện tử & viễn thông
-trị số chuẩn đỉnh

Đặt câu có từ "quasi-peak value"

Dưới đây là những mẫu câu có chứa từ "quasi-peak value", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ quasi-peak value, hoặc tham khảo ngữ cảnh sử dụng từ quasi-peak value trong bộ từ điển Từ điển Anh - Việt

1. Maximum attenuating speed D of side lobe peak value.

2. The equation of the peak current for a quasi- reversible interfacial reaction in oscillopolarography was discussed. The equation has been verified.

3. 24 The variation of the peak peak value with the depth of rectangular slot was affected by magnetization of ferromagnetic material.

4. The peak value (i = 272) is calculated assuming the following data of table C.

5. The article returns discovery, in householder lifetime belongings is accumulated appeared two high peak value.

6. Airlines have high symbolic value because they represent the peak of technological achievement and modern prosperity.

7. With the known thickness and the A.C. peak value the intrinsic electric strength can be calculated.

8. A voltage proportional to absolute temperature (VPTAT) is substracted from the peak value in a subtracter (29).

9. Peak power = (peak potential in volts) × (peak beam current in amperes).

10. The maximum absolute value acceleration peak shall be recorded for each of the specified frequency break points

11. The maximum absolute value acceleration peak shall be recorded for each of the specified frequency break points.

12. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).

13. Peak power» = (peak potential in volts) × (peak beam current in amperes).

14. Any algebraic extension of a quasi-algebraically closed field is quasi-algebraically closed.

15. “Peak power” = (peak potential in volts) × (peak beam current in amperes).

16. 'Peak power' = (peak potential in volts) x (peak beam current in amperes).

17. ‘Peak power’ = (peak potential in volts) x (peak beam current in amperes).

18. ‘Peak power’ = (peak potential in volts) × (peak beam current in amperes).

19. "Peak power" = (peak potential in volts) × (peak beam current in amperes).

20. The wave form of the impulse is the standardized 1.2/50 and its peak value is 6 kV.

21. 'Peak power' = (peak potential in volts) × (peak beam current in amperes).

22. The magnitude of SPM-induced spectral Broadening can be estimated from the peak value of δω in Fig

23. [Peak power = (peak potential in volts) x (peak beam current in amperes).]

24. Auteciously autoeciously facetiously half-ingeniously half-rebelliously half-seriously nonabstemiously nonadventitiously nonfacetiously nonsacrilegiously overabstemiously pancreaticoduodenostomy pareciously paroeciously pseudosacrilegiously quasi-conscientiously quasi-enviously quasi-mysteriously

25. Peak power = (peak potential in volts) x (peak beam current in amperes).