Nghĩa của từ position switch bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-công tắc giới hạn
@Lĩnh vực: điện
-công tắc điểm cuối (hành trình)
-công tắc vị trí

Đặt câu có từ "position switch"

Dưới đây là những mẫu câu có chứa từ "position switch", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ position switch, hoặc tham khảo ngữ cảnh sử dụng từ position switch trong bộ từ điển Từ điển Anh - Việt

1. at respective position of switch 4

2. The ball changes position based upon gravity and the changing position of the switch housing

3. The ball changes position based upon gravity and the changing position of the switch housing.

4. Switch to the Start or End tab to adjust the layer's other position.

5. The isolation switch works with the 1502 vacuum Contactor and the 1503HM isolation switch handle to isolate the power cell when the isolation switch handle is moved to the OFF position.

6. I turned the 20 mm cannon switch to the "off" position, and closed in.

Tôi xoay khóa khẩu pháo 20mm về vị trí "tắt", rồi áp sát vào.

7. However, these powers cannot strengthen Sea-Invest’s position because the fringe customers can switch to alternative terminals.

8. Reed switch; Proximity sensor; Float Sensor; E-bike Brake Switch; Reed Relay; Flow Switch; Tilt Sensor Switch; Vibration Sensor Switch; Centrifugal Force Sensor Switch.

9. Leese rolled the throttle open to the indent starting position and squeezed the trigger switch on his collective.

10. (Audio) MZ: So switch, switch, switch, you're using glucose, glucose, glucose.

Chuyển đổi, chuyển đổi, chuyển đổi bạn đang dùng glucose, glucose, glucose.

11. All optical batcher banyan switch, batcher switch, banyan switch and contention manager

12. Now, switch the machine's primary breaker to the " on " position and move to the control panel and press [ POWER ON ]

Bây giờ, chuyển máy cắt chính của máy sang vị trí " on " di chuyển đến bảng điều khiển và nhấn [ điện trên ]

13. 4.3.5 TESTING GALVANOMETER SENSITIVITY The galvanometer sensitivity may be tested by placing switch SW2 of the RTT in the CALIB position.

14. To switch between current Calls, tap Switch

15. Switch charge Free and unlimited switch per annum.

16. Switch.

17. Further, a control signal from the diagnosis module alters the position of at least one output switch to disconnect the faulty module.

18. Press "Open" or "Close" button, while reaching stop position, stop switch will be activated and the proscenium curtain machine will stop running.

19. 29 Examination of the aircraft revealed the horizontal stabilizer was in the full travel nose-down position and beyond the micro switch stop.

20. Switch User

21. Attenuator Switch provides 4 levels of power/volume reduction, -4dB, -8dB, -12dB and -16dB-16dB Level Control allows infinite power/volume reduction down from the -16dB position; Speaker/Load Switch – Choose between using your live speaker cabinet or …

22. Ignition Switch

23. You can quickly develop switch applications using the NI-SWITCH or NI-DAQmx switch application programming interfaces (APIs).

24. Waterproof board switch and method for manufacturing waterproof board switch

25. Acceleration switch