Nghĩa của từ pitch circle bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-vòng chia
-vòng lăn
-vòng tròn chia
-vòng tròn lăn
-vòng tròn sinh
@Lĩnh vực: cơ khí & công trình
-quỹ đạo bước răng
-vòng (tròn) chia
-vòng (tròn) lăn
-vòng tròn nguyên bản
@Lĩnh vực: hóa học & vật liệu
-vòng gốc (của bánh răng)

Đặt câu có từ "pitch circle"

Dưới đây là những mẫu câu có chứa từ "pitch circle", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ pitch circle, hoặc tham khảo ngữ cảnh sử dụng từ pitch circle trong bộ từ điển Từ điển Anh - Việt

1. Pitch circle diameter of fixing holes/studs;

2. pitch circle diameter of fixing holes/studs;

3. ‘x’ number of mounting bolt holes and pitch circle diameter

4. The tooth profile of the first gear (10) lies entirely within the pitch circle of the first gear, and the tooth profile of the mating gear (12) lies entirely outside the pitch circle of the mating gear.

5. Additionally, however, further characteristics can be required: e.g. data on the attachment (attachment bores and pitch circle) of series wheels.

6. 6.1 Types of Backlashes (1) Circumferential Backlash ( j t ) Circumferential Backlash is the length of arc on the pitch circle

7. The radial distance between the tip of a gear tooth and the pitch circle of a gear or the pitch line of a rack.Compare dedendum. Also called Addendum circle

8. The tooth profile angle is 45°,the pressure angle is equal to 0, the length of tooth is equal to t/2, and the addendum circle is pitch circle.

9. The table below (last updated 2021-05-03) contains bolt pAttern / bolt circle / stud pAttern / lug pAttern / PCD / pitch circle diameter (different names for the same thing) and also wheel offset (ET), center bore etc

10. Defining DC (unit: m) as the pitch circle diameter of the carrier and d (unit: mm) as the recess depth of the recesses (41, 51) from the tooth tips, the relation holds that 0.24 ≦ d/DC ≦ 1.89.

11. The at least one conveying chain sprocket (14) and/or the at least one deflection chain sprocket have/has a pitch circle (23) with a pitch (T) which is related to the tooth gaps (22) and corresponds to half an engagement spacing (E) of the link chain (8).