Nghĩa của từ peak-to-valley value bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: điện
-trị số đỉnh tới đáy

Đặt câu có từ "peak-to-valley value"

Dưới đây là những mẫu câu có chứa từ "peak-to-valley value", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ peak-to-valley value, hoặc tham khảo ngữ cảnh sử dụng từ peak-to-valley value trong bộ từ điển Từ điển Anh - Việt

1. That the surface's radiation cooling affects on the ground layer temperature inversion is presented as the relatively strong echo peak value corresponding to the temperature variety's valley value.

2. Maximum attenuating speed D of side lobe peak value.

3. Tasaday is also the name of the forested peak rising above their hidden valley.

4. Note: If the CMPA peak is sufficiently separated from other peaks valley-to-valley baseline allocation should be used, otherwise use dropping perpendiculars to a common baseline, which should have starting point close to the CMPA peak (thus not at t = 0 min!).

5. 24 The variation of the peak peak value with the depth of rectangular slot was affected by magnetization of ferromagnetic material.

6. The chance of discovering another adaptive peak by crossing over an adaptive valley would be negligibly small.

7. A voltage proportional to absolute temperature (VPTAT) is substracted from the peak value in a subtracter (29).

8. 7 The chance of discovering another adaptive peak by crossing over an adaptive valley would be negligibly small.

9. The peak value (i = 272) is calculated assuming the following data of table C.

10. The article returns discovery, in householder lifetime belongings is accumulated appeared two high peak value.

11. Airlines have high symbolic value because they represent the peak of technological achievement and modern prosperity.

12. With the known thickness and the A.C. peak value the intrinsic electric strength can be calculated.

13. #1 Best Value of 2 places to stay in Conifer “ Aspen Peak Cellars has moved to 60750 US 285, Bailey CO 80421

14. 8. microprocessors to calculate the cardinal points (beginning of peak, end of peak and top of peak);

15. Peak power = (peak potential in volts) × (peak beam current in amperes).

16. The maximum absolute value acceleration peak shall be recorded for each of the specified frequency break points

17. The maximum absolute value acceleration peak shall be recorded for each of the specified frequency break points.

18. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).

19. Peak power» = (peak potential in volts) × (peak beam current in amperes).

20. “Peak power” = (peak potential in volts) × (peak beam current in amperes).

21. 'Peak power' = (peak potential in volts) x (peak beam current in amperes).

22. ‘Peak power’ = (peak potential in volts) x (peak beam current in amperes).

23. ‘Peak power’ = (peak potential in volts) × (peak beam current in amperes).

24. "Peak power" = (peak potential in volts) × (peak beam current in amperes).

25. The wave form of the impulse is the standardized 1.2/50 and its peak value is 6 kV.