Nghĩa của từ peak load requirement bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-nhu cầu phụ tải đỉnh
Đặt câu có từ "peak load requirement"
1. Load demand can exceed 66 percent during peak periods.
2. The first peak, obviously, is the limb hitting the load cell.
Rõ ràng, điểm cao thứ nhất là khi cái càng đập vào vỏ cảm biến.
3. Multifunctional heating systems consist of a CHP module, heat storage system and a peak load boiler.
4. For the upcoming ATST, the heat load is 2.5 MW/m2, with peak powers of 11.4 kW.
5. Extreme events transport a significant portion of the total suspended load, but so also do annual peak events.
6. Accordingly, this Article contains an additional requirement designed to prevent the accumulation of toxic fumes in the load compartment
7. Accordingly, this article contains an additional requirement designed to prevent the accumulation of toxic fumes in the load compartment.
8. Accordingly, this Article contains an additional requirement designed to prevent the accumulation of toxic fumes in the load compartment.
9. Freezers and immersion heaters will be switched off for no more than 15 minutes at a time during peak-load periods.
10. Peak power = (peak potential in volts) × (peak beam current in amperes).
11. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).
12. Peak power» = (peak potential in volts) × (peak beam current in amperes).
13. Markov model can overcome this defection, so combine CM with Markov model to predict peak-load of an area in Shangdong province.
14. “Peak power” = (peak potential in volts) × (peak beam current in amperes).
15. 'Peak power' = (peak potential in volts) x (peak beam current in amperes).
16. ‘Peak power’ = (peak potential in volts) x (peak beam current in amperes).
17. ‘Peak power’ = (peak potential in volts) × (peak beam current in amperes).
18. "Peak power" = (peak potential in volts) × (peak beam current in amperes).
19. 'Peak power' = (peak potential in volts) × (peak beam current in amperes).
20. [Peak power = (peak potential in volts) x (peak beam current in amperes).]
21. Peak power = (peak potential in volts) x (peak beam current in amperes).
22. This is the minimum requirement to prevent accidental exposure of all transport workers and any personnel involved in load inspection and accident recovery.
23. Amole Peak rises on the western ridgeline of Wasson Peak, the highest peak in the area
24. Bolts are generally considered to be larger than screws and are used in a wide variety of applications especially where load-carrying capacity is a requirement
25. 8. microprocessors to calculate the cardinal points (beginning of peak, end of peak and top of peak);