Nghĩa của từ outer diameter bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-đường kính ngoài

Đặt câu có từ "outer diameter"

Dưới đây là những mẫu câu có chứa từ "outer diameter", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ outer diameter, hoặc tham khảo ngữ cảnh sử dụng từ outer diameter trong bộ từ điển Từ điển Anh - Việt

1. • Actual deployed stent outer diameter verification

2. Measure your axle thread size, the Cones outer diameter and overall length.

3. The universal measurements for Bearings are 8mm (core), 22mm (outer diameter), and 7mm (width).

4. If the outer diameter exceeds 5.5 cm, the aneurysm is considered to be large.

5. ii. In bar or tube form, with an outer diameter of 75 mm or greater.

6. In other embodiments, the method includes ablating a portion of the outer diameter of the proximal region material.

7. The Aluminised Mylar straws are 8 mm in outer diameter and the walls are roughly 100 pm thick

8. Tubes with an outer diameter of 0,2 m or more and made from any of the following materials:

9. Our Unturned Blanks are of extremely high quality, have an outer diameter of 1.250”, and can be made to any length up to 33”

10. an illuminated ring target whose outer diameter, D, subtends an angle of η minutes of arc at a point situated at x metres (Figure #a); or

11. an illuminated ring target whose outer diameter, D, subtends an angle of η minutes of arc at a point situated at x metres (Figure 11a); or

12. FlushCut™ Burrs are designed so that the cutting flutes are flush with the outer diameter of the shaft for use as a “cutting block” technique.

13. The ions are accelerated radially inward to bombard a titanium layer on an outer diameter of a target rod concentrically located along a central axis of the cylindrical housing to generate neutrons.

14. The transmitting coil would be the Tesla's Bifilar pancake coil - I would just pick a random speaker wire and make as many turns as needed to approximate the outer diameter of the receiving coil

15. Industrial tools having an outer diameter surface protected from abrasion due to silicious materials present in the Earth's crust by a layer of a hard-facing alloy with improved crack resistance, improved wear resistance, and improved hardness are provided.

16. Each groove (6) of the second groove set runs at a second angle inclined radially forwards to a first rotational direction (n_1), forming a groove passage from the friction surface inner diameter (d_i) to the friction surface outer diameter (d_a).

17. Each groove (5) of the first groove set runs at a first angle inclined radially backwards to a first rotational direction (n_1), forming a groove passage from the friction surface inner diameter (d_i) to the friction surface outer diameter (d_a).

18. The combinational airlock and crash stop apparatus (300) further includes a crash stop (302), coupled to the airlock latch portion (310), to restrict the rotation of the actuator arm (412) such that the distal end of the actuator arm (412) and the head (410) are prevented from being moved outwardly beyond the outer diameter of the disk (402).